Re: PiTNC9k6 settings


Yep, just replied.  while troubleshooting I moved the jumpers to the left in the pic... a little more time with the DMM and found that... moved them back, recompiled with serial1 set for hostserial and all is well...

On Sun, Jun 14, 2020 at 9:43 PM Mat Murdock <mat.murdock@...> wrote:
You actually can choose which pins from the Teensy you want to have routed Pi.  If you jumper the pins as shown below then pins 0 and 1 from the Teensy are routed to the PI.  I then have the following defined in TeensyConfigPacket.h

  #define HOSTPORT Serial1
  #define MONPORT Serial
  #define HOSTSPEED 19200


Join to automatically receive all group messages.