Re: Totally Hosed TNCPI-9k6


 

The pitnc-9k6 is hearing well be appears to me mute.  I have sent the calibration command
sudo ./pitnc_setparams /dev/serial0 0 15 3
and listened on another radio and the radio keys but no audio tones.  I tried using axcall on the pitnc-9k6 and monitoring with another TNC and nothing heard. 
  
Here are my params:

pitnc_setparams Version 0.0.0.5

 

   PIC Software Version          11

01 TXDelay - Zero means use ADC          10

02 Persistance                                         160

03 Slottime (in 10 mS)                               30

04 TXTail                                                       1

05 Full Duplex - Not used                       255

06 Our Channel (Hex)                                  ff

07 I2C Address (0 = async)                Hex   ff

08 Mode Speed                                     1200

09 RX Level (Config)                                200

10 TX Level                                               255

11 RX Level (Actual)                                200

13 Centre Freq                                       1700

8 b a a0 1e 1 ff ff ff c c8 ff c8 aa 10 c0 sum 0


What should I try next.?
--

Bob AF9W

Join RaspberryPi-4-HamRadio@groups.io to automatically receive all group messages.