Re: PiTNC9k6 settings


Mat Murdock
 

I am testing version 11 to make sure everything is working before I start loading it on new TNC's.  I have noted that the default values are not being set on the Teensy when I first flash it.  This is what I get on the console.

   TNC Software Version          11
01 TXDelay - Zero means use ADC 255
02 Persistance                  255
03 Slottime (in 10 mS)          255
04 TXTail                       255
05 Full Duplex - Not used       255
06 Our Channel (Hex)             ff
07 I2C Address (0 = async) Hex   ff
08 Mode Speed                  25500
09 RX Level (Config)            255
10 TX Level                     255
11 RX Level (Actual)              0
13 Centre Freq                 2550
8 b ff ff ff ff ff ff ff ff ff ff 0 ff fc c0 sum 0

Any thoughts on why this may not be working?  What file is the SetDefaultKISSParams function at?

Mat
 

Join RaspberryPi-4-HamRadio@groups.io to automatically receive all group messages.