toggle quoted messageShow quoted text
I am not sure how they are connected but I think Vertex Standard
is Yaesu USA or some such
but it should be an official cable.
On 5/29/20 2:55 PM, Daniel Norris
You know, I thought it was an "official" cable from Yaesu, but
it's a Vertex Standard brand CT-62 adapter. its logo just looks a
little like a YS. I put in an order last week for an XGGCOMMS
cat & isolated audio adapter, so I'll be able to report back
if that works well for me.
My problem with the pi powering up wasn't what I thought it was. I
cut the positive wire in a usb extension cable, verified it was
disconnected, and plugged in the adapter and the pi powered right
up. Turns out I accidentally wired the power switch for the
12v-5v adapter that powers the pi into the ground wire, so when
the usb adapter was plugged in, it connected the ground from the
5v side of the power adapter and it started pumping out 5v to the
pi. Easy fix! Still might need the 5v disconnect for the usb,
@Chuck - that model was difficult to slice -> gcode. I got it
to print, but it was too thin. I'll have to make another model
later & have another try to make an insert.