toggle quoted messageShow quoted text
If you are going to give a mean
answer...why answer at all.
I am pretty sure all of those radios
have available serial cables to CAT.
From there you use a USB to serial
adapter...I use a generic one I got on Amazon... it is plug and
play on the Pi basically.
On 4/20/2020 1:34 PM, John D Hays -
I use these
USB cables on Raspberry Pi to do CAT control on Yaesu and on
In working on using the Build A Pi script from Jason,
KM4ACK, I have come across the need for assistance.
I need some guidance on identifying available cables to
allow FLRIG to control the RIG via CAT as built in the
script / setup.
I own an older FT-450 (currently my main Base HF Rig
using a SignaLink), an FT-897 (my target HF Rig for
mobile / portable ops) and an ICOM 718 (currently
planned to be my back shack rig with a SignaLink and also
connected to my 80m dipole).
The reason I am looking for cable for all three rigs is
that I will eventually want to move away from the big PC
I am using in my shack and move the PI and totally 12v
Thank you in advance for your help in locating cable
options for CAT control on the PI for these rigs.