Date   
Re: The Nov 2nd, 2019 RaDAR Challenge is coming up!

Eddie Leighton
 

Hi Greg,

I'll be active. Luckily I have a 817 setup again and dumped the Xeigu :) Thanks for all the promotions.

Thanks too for all your inspiring videos.

73 de Eddie ZS6BNE

On Sat, Oct 19, 2019 at 3:32 PM Greg Lane <LaneKG@...> wrote:
Who is taking the challenge?


5 5 5 ...

Greg N4KGL

Re: RaDAR Promotional Video

Rick Stoner
 

Nice!  Thanks for sharing. 

~Rick / KC3DRU


.


On Sat, Oct 19, 2019 at 9:48 AM Greg Lane <LaneKG@...> wrote:

QSO TODAY EPISODE 028 - EDDIE LEIGHTON - ZS6BNE

Greg Lane
 

https://www.qsotoday.com/podcasts/zs6bne

Eddie articulates the philosophy of RaDAR, Rapid Deployment Amateur Radio.

Enjoy,

Greg N4KGL

RaDAR Promotional Video

Greg Lane
 

Event: Nov 2019 RaDAR Challenge - Saturday, 2 November 2019 #cal-invite

RaDAR@groups.io Calendar <RaDAR@...>
 

Nov 2019 RaDAR Challenge

When:
Saturday, 2 November 2019

Where:
Anywhere

Organizer: N4KGL LaneKG@...

Description:
See rules at http://radarops.co.za/index.php/radar-rules/

The Nov 2nd, 2019 RaDAR Challenge is coming up!

Greg Lane
 

Who is taking the challenge?


5 5 5 ...

Greg N4KGL

500hz Collins filter or equivalent INRAD for a FT-897D

Kyle N4NSS
 

I'm looking for a 500hz Collins filter or equivalent INRAD for a FT-897D / FT-857D radio.
 
Anyone have a spare sitting around? 
 
Email me at N4NSS at Yahoo dot com or call 727-331-2924 leave a message.

73-----------------------
Kyle  
N4NSS <<click this <<Enjoy the Magic of HF Radio. It's just not a hobby, it's an adventure.

Re: Icom 703 should have been Icom 705

Thomas Robinson
 

Typing mistake..  However I was also excited by the Icom 703.  I bought one and ams till using it

Tom G0SBW

Icom 703

Thomas Robinson
 

I'm quite excited about this one.  OK, just 10W if using external power.  But no problem for me I always use external power for my IC703, FT 817 and KX3. Hopefully the price will be acceptable.

Tom G0SBW

RaDAR Challenge July 13, 2019

Greg Lane
 

See the rules at  http://radarops.co.za/index.php/radar-rules/

Let us know your plans for this one.

Thanks,

Greg N4KGL

N4KGL RaDAR Challenge Report

Greg Lane
 

Short on contacts, but Dennis WA6QKN and I still had fun. Thanks if you tried to hear us. The conditions were very bad on both 40 and 20 meters..

Re: RaDAR on 2Metres

N5VMO Pat
 

I always use to love to use the 2m and 70cm SSB and for SATs at home with my stacked pair of "Big Wheel" antennas and 300 plus watts of power =)    Easy everyday 400 mile contact and 900 mile contact into lower part of Canada =)   I still have the amps but the antennas got destroyed in the move to the apartment ... need to make more as they cost almost $150 each to buy now days and a few hundred for the power divider ( I made my own power dividers =)


On Wed, Apr 10, 2019 at 10:30 AM Thomas Robinson via Groups.Io <g0sbw=btinternet.com@groups.io> wrote:
Thanks for the comment Pat.  Yes, M0UKD's clothes pin element fastening idea works well.  Its surprising how tight they grip the elements.  If 6mm tubing is used they would be gripped even more securely.  I am quite lucky to live in a coastal area.  Even though most of the area is at (and sometimes below) sea level, there are some highish cliffs that give a good take off over the North Sea to Holland, Belgium Germany and even Scandinavia on a  day with good VHF conditions.  Local contest groups tend to gather at one point in particular,  Walton- on-the-Naze at weekends.  Being retired from work I can give it a go on week days ;-)  At my home QTH i can hear Dutch and Belgian repeaters with a very small collinear 
_._,_._,_


--
73's Pat  N5VMO


Re: RaDAR on 2Metres

Thomas Robinson
 
Edited

Thanks for the comment Pat.  Yes, M0UKD's clothes pin element fastening idea works well.  Its surprising how tight they grip the elements.  If 6mm tubing is used they would be gripped even more securely.  I am quite lucky to live in a coastal area.  Even though most of the area is at (and sometimes below) sea level, there are some highish cliffs that give a good take off over the North Sea to Holland, Belgium Germany and even Scandinavia on a  day with good VHF conditions.  Local contest groups tend to gather at one point in particular,  Walton- on-the-Naze at weekends.  Being retired from work I can give it a go on week days ;-)  At my home QTH i can hear Dutch and Belgian repeaters with a very small collinear when a lift is on.

Re: RaDAR on 2Metres

N5VMO Pat
 

Very nice set up you built Tom =)   I really like the "cloths Pin" element attachment =)   Really makes it portable =)

Listening to the the SAT pass on AO-92 ( GREAT FOOTPRINT ) Saturday on the HT with Greg's group got me to thinking =)   I added the SAT frequencies to my mobile 2 m rig in the truck so if in travel maybe I can operated =)     I just missed the schedule by 15 minutes because traffic heading to the State Park mountain =(    I could hear the SAT for over fifteen minutes on that pass while being fifteen minutes late ( almost a total time of 45 min. for that pass alone once in place =)   I was even on the wrong side of the mountain driving up to the park and had perfect copy of the SAT 8-)   I could not use the HT while driving up a winding narrow road up the hill; but could listen =)   The mobile has Bluetooth headset and now has SAT frequencies in its memories 8-)




--
73's Pat  N5VMO


RaDAR on 2Metres

Thomas Robinson
 

Hi I recently watched a Utube video by "Radio Prepper" regarding use of 2M SSB.
https://youtu.be/LaRsBtT52kc

This got me thinking about 2M SSB/CW for RaDAR use.  The key point of the video was the ease of deployment of the antenna he was using which is a design of M0UKD
https://m0ukd.com/homebrew/antennas/144mhz-2m-portable-yagi-vhf-beam-antenna/

The novel construction of this antenna makes it ideal for /P RaDAR use.  Assembly time for the antenna is claimed to be about 30 seconds.  I considered such an antenna mated with my RaDAR trolley would make an good combination.  I have therefore made one using bits and pieces I had available.  I had some 4mm solid Aluminium rod suitable as replacement for the 6mm tubing made in the design.  The resulting antenna has an SWR of 1.4:1 over 144.000 to 146.000.  I suppose I could start trimming elements to try improve the SWR but I think I will leave the antenna as is.  the antenna I have built seems quite robust enough for occasional /P outings.  Certainly it is very fast to assemble and deploy on the trolley.  Have made the mast adaptor suitable for fastening to the 10M Clark, extendable mast at the home QTH, should improve access to a couple of local CW practice nets. It can also be deployed from a 7M Aluminium mast fastened to the tow hitch of the camper van.

So, this should prove to be quite a useful addition to the antenna stable.  Just got to vanish it now.

Some photos below:-

G0SBW's RaDAR Challenge

Thomas Robinson
 

I was operational at my first location ( JO01MT85TS) at 13:25 UTC. I quickly got my first 5 QSOs, on 20m, by 13:56. These were 4 Europeans and N4GNR, Dan, in N.E.Georgia. So it was clear 20m was open to N. America.

I motored to my second location at JO01MS64KV . Here I concentrated on calling CQ Radar rather than just making QSOs. I did not manage any Radar contacts. Whilst at this station 20m filled up with contesters working the Polish SSB contest. So I moved to 17m which had very variable conditions.

I had some interesting QSOs there but again concentrated calling for RaDAR. There were periods when the band was open and when the band seemed closed. On 17m I tried to work 9Q65BB (Democratic Republic of Congo) who was working split. He was quite a strong signal, but by the time I managed to get the FT857 in split mode the band had closed and I lost him. I did work Rob, VE1CHW in Halifax and also W1XX who seemed desperate to work the Florida state parks special event. I managed to break into his constant calling of "CQ Florida State Parks" and informed him of Greg's whereabouts on 20m and 17m. He thanked me but I think he was a bit puzzled that a "G" station was pointing him in the right direction for Florida  An interesting QSO was with G0HUZ/MM who was operating with a KX3 and a vehicle type G-Whip from a small passenger cruise ship near the Canery Islands off West Africa.

I decided to call it quits after 3 hours operating with no RaDAR contacts. It was still an entertaining afternoon. The FT857 with 70W feeding the "hamstick" type antennas worked well. A couple of photos showing the camper van at the two locations are attached.

Antenna Choice - If I Follow Saturday's RaDAR Challenge at Home QTH Rather Than Taking Part On Foot

Thomas Robinson
 

After reading John's (VA3KOT) post on the RaDAR  IO group of 26th March I decided to deploy my old 20m, vertically polarised, delta loop thinking it would be an improvement on the permanent horizontal loop antenna (this loop is cut for 80m but tunes up on all bands).  RBN results seem to suggest the large horizontal loop is a better performer - I am a bit miffed about that.

Attached are two images.  One shows the RBN results, the other shows the delta loop and part of the horizontal loop.  You will note the willow has been severely lopped, but is generating a lot of new shoots now that spring is upon us.  The eagle eyed will note the crow at the top of the antenna support - I don't think he influenced the results.

The  14:47/48 results were from the vertical polarised 20m delta loop, the 14:53/54/57 results were from the horizontally polarised loop.  Interestingly when I first tested the 20m delta I heard, on SSB, an Indonesian station at 5by7.  This would have been at least twice as far away as the Canadian station - so maybe this antenna is for ultra DX :-)


40m Antenna Comparison

John Corby
 

Gadzooks! Snow almost gone and southern Ontario daytime temperatures above freezing! So I hauled wire, poles and radio into the backyard for a comparison test. These are the antennas I tested:
1. Vertically polarized Delta loop
2. Half Rhombic (full wave, end fed wire, center supported at 23ft with ends up about 6 feet)
3. End Fed Full Wave wire up 8ft
4. Quarter wave sloping vertical

All four antennas produced multiple RBN spots but the Delta loop was the clear winner both in distance and signal strength of reception reports (up to 24dB S/N). The half Rhombic was a good second and the End Fed Full Wave wire came a close third. All three used the same 137ft wire. In last place was the quarter wave sloping vertical which produced disappointing results but used only 33ft of wire worked against ground through a GTU (Ground Tuning Unit - a series connected LC tuner). All tests were done at 5 watts.

Tomorrow I plan to hold my first outdoor operating session of the season in a place where the ground is solid 3 billion-years-old Canadian Shield rock. That will be a new challenge that will really put the Delta loop to the test. If you're around during the early afternoon (Eastern Time zone) listen up for me around 7.030MHz CW.

John, VA3KOT

Re: Multiple operators?

N5VMO Pat
 

Hi Tom  ...... the same here .... I have two live - in state park rangers ( now Hams ) come by most times they see me out and got em hooked that way 8-)    I even go visit when they are off work and we talk radios and antennas =)


On Tue, Mar 26, 2019 at 11:47 AM Greg Lane <LaneKG@...> wrote:
I have a ham friend Dennis that does the RaDAR Challenge with me. I would say sure go ahead and enhance the experience.

Thanks,

Greg N4KGL 

On Tue, Mar 26, 2019, 9:22 AM KC3TOM <tom.pghmtb@...> wrote:
Hi,
I'm trying to get some more people in my club interested.  I invited another member to go with me, but I don't want him to get bored.  Is it OK if he uses my callsign and takes a turn at the microphone?  There is no mention of this in the rules.  
Thanks
Tom.



--
73's Pat  N5VMO


Re: Multiple operators?

Greg Lane
 

I have a ham friend Dennis that does the RaDAR Challenge with me. I would say sure go ahead and enhance the experience.

Thanks,

Greg N4KGL 

On Tue, Mar 26, 2019, 9:22 AM KC3TOM <tom.pghmtb@...> wrote:
Hi,
I'm trying to get some more people in my club interested.  I invited another member to go with me, but I don't want him to get bored.  Is it OK if he uses my callsign and takes a turn at the microphone?  There is no mention of this in the rules.  
Thanks
Tom.