I have found the culprit. It's not the RFzero. It's the amplifier that follows it. It auto-oscillates around 1.5 GHz and disturbs the GPS receiver. Nothing more than that. It took me a while to discov

#Beacon

Excellent. Thanks Bo. Saw the original link a couple months back when trying to find a replacement for a RA30H0608M based PA. Now have a couple options to consider. 73, Rick VK6RK

#Beacon #Hardware

Hi Bo and friends, Today I finished the RFzero FT8 + CW + CARRIER project. I am using a board made in china that uses the RA60H1317M module. I got a power of 45 W. It is enough. The RFzero will excite

#Beacon #FT8 #Installation

Excellent Bo! thank You.

#FST4W #Beacon

Hi Rob, PE1ITR writes here https://groups.io/g/MSHV/message/2321 that he thinks that the beacon must be in the msbcn_db.dbbn file in MSHV. Bo

#Beacon #FT8

Yes, it's okay now. To increase the transmission speed, the time must be shortened. Tnx. Mihai, YO8RHM

#Beacon #RFzero_Manager #CW

Bullseye! Tnx Bo.

#Beacon

Hello Mike Yes, just pick the beacon program you like: https://www.rfzero.net/examples/beacons/ Then do the necessary configuration where the minimum is probably: call, locator and frequency. Bo

#GPSDO #Beacon

I don't think it sends FT8 unless it has GPS lock. You might check that.... Mike WY6K "One must be sane to think clearly, but one can think deeply and be quite insane." ~Nicola Tesla

#FT8 #Beacon

Mike you can actually hear the CW-FSK -400 Hz from nominal tone - preserved ;-)

#Beacon

No kidding! I missed that. I will play around with it... Thanks Mike WY6K "... somewhere in the distance, there's a tower and a light, broadcastin' the resistance, through the rain and through the nig

#Beacon

Hello Mike All OK. This is an interesting project I am interested in the generic parts of your endeavor for general implementation or one or more of the beacon example programs. Bo

#Installation #Beacon

Hello If you wondered what happened with this topic Bob, AB5N, wrote me off-list Wednesday and attached here is the FT8 + CW + dashes program I sent to Bob which fits the bill. If you want to study an

#Beacon #FT8

Hi guys, I am please to report that EI0SIX beacon is now QRV using an RFzero board on 50.004 using PI4 and CW as part of the SB project. Thanks to Bo OZ2M , Tim EI4GNB and the other developers for the

#Beacon #Hardware #PI4

Hi Warren PI-RX and I think MSHV too uploads decodes to PSKReporter.info. Bo PS: To everybody else than Warren. You are allowed to post here too. It is not Warren's and my personal place ;-)

#Beacon #PI4

No problem! I had already found that line once and changed it based on your earlier answer here. I did not look for the second instance. Thanks! Warren - WA8TOD

#Bug #Beacon #WSPR

Bo Thank you I was using 106 MHz multiplied by 9 so it was in range on my test set Final frequency 954 MHz 73’s Denis G0OLX

#Beacon #PI4 #Bug