|
Need Quantum Programmer 3 messages
Hi, my name is Sarah Griessenboeck and I am building an ambitious O scale layout here in Austria. For a long time I try to buy a Quantum Programmer and a bunch of DO decoders and had contact to Kelly
Hi, my name is Sarah Griessenboeck and I am building an ambitious O scale layout here in Austria. For a long time I try to buy a Quantum Programmer and a bunch of DO decoders and had contact to Kelly
|
By Sarah Griessenboeck
·
|
|
QSI - No response 2 messages
Hi Kelly, I have a similar problem as the previous poster on Emails. Hope you can assist. I’ve been handed a QSI decoder that came out of a first run BLI Cab Forward to be installed into a Rivarossi m
Hi Kelly, I have a similar problem as the previous poster on Emails. Hope you can assist. I’ve been handed a QSI decoder that came out of a first run BLI Cab Forward to be installed into a Rivarossi m
|
By John Burkhardt
·
|
|
Email to QSI
My emails to QSI don't seem to be getting through. If you see this Kelly the number on the board is 050-0091-01 your emails are coming to me. thanks Ray
My emails to QSI don't seem to be getting through. If you see this Kelly the number on the board is 050-0091-01 your emails are coming to me. thanks Ray
|
By Ray Di Ciacca
·
|
|
Atlas GP38 w/QSI board -- ditchlight wiring question 2 messages
Hello, I am fairly new to this group and I have a ditchlight wiring question. First of all, I'm working on a pair of HO scale Atlas GP38 Gold's with QSI decoder/sound built in. I found a file on the i
Hello, I am fairly new to this group and I have a ditchlight wiring question. First of all, I'm working on a pair of HO scale Atlas GP38 Gold's with QSI decoder/sound built in. I found a file on the i
|
By John Joyce
·
|
|
Sunset L-105 (4-6-6-4, 2-Rail) Titan board pinout information needed 3 messages
Hello all. I just joined the group. Thanks. I just received my Sunset 3rd Rail L-105 (4-6-6-4, 2-Rail) with a QSI DCC decoder mounted in the tender, and I want to add a fan-driven smoke unit with 4 in
Hello all. I just joined the group. Thanks. I just received my Sunset 3rd Rail L-105 (4-6-6-4, 2-Rail) with a QSI DCC decoder mounted in the tender, and I want to add a fan-driven smoke unit with 4 in
|
By Darrell
·
|
|
wiring Diagram
I cannot seem to get through to Kelly. I had QSI check out a decoder for me which they said is fine, but I do not have a wiring diagram for it. Does anyone have one. thanks Ray
I cannot seem to get through to Kelly. I had QSI check out a decoder for me which they said is fine, but I do not have a wiring diagram for it. Does anyone have one. thanks Ray
|
By Ray Di Ciacca
·
|
|
QSI Silabs Installation 4 messages
All, I have had success in installing the Silabs driver for the QSI programmer with the most recent Windows 10 OS. It took both the information provided in the original QSI Documentation found on what
All, I have had success in installing the Silabs driver for the QSI programmer with the most recent Windows 10 OS. It took both the information provided in the original QSI Documentation found on what
|
By signalman11
·
|
|
2010 Atlas Gold TrainMaster randomly stops and restarts 15 messages
I have a 2010 # 7883 2010 ( tel:7883%202010 ) Atlas Master Series Gold EL TrainMaster cab #1860 that I like very much except for one annoying thing that it does - it randomly stops, sounds quit, light
I have a 2010 # 7883 2010 ( tel:7883%202010 ) Atlas Master Series Gold EL TrainMaster cab #1860 that I like very much except for one annoying thing that it does - it randomly stops, sounds quit, light
|
By David H
·
|
|
Keep Alive
Are there any keep alive available for the Titan O Scale decoder? Thanks Jay Beckham My Blog https://jaysoscalelayout.blogspot.com/ Join us at JayOScaleLayout+subscribe@groups.io
Are there any keep alive available for the Titan O Scale decoder? Thanks Jay Beckham My Blog https://jaysoscalelayout.blogspot.com/ Join us at JayOScaleLayout+subscribe@groups.io
|
By Jay Beckham
·
|
|
Sunset 3rd GGD SD9 10 messages
Does anyone know the specific QSI decoder model in the GGD SD9? I am trying to change some things on mine, and I don't think I am using the right decoder model #.
Does anyone know the specific QSI decoder model in the GGD SD9? I am trying to change some things on mine, and I don't think I am using the right decoder model #.
|
By Jim B
·
|
|
Silabs and Windows 10 4 messages
Greetings. After a hard drive crash recently, I'm trying to restore some programs. I've been attempting to install the QSI Programmer, but I keep getting a message after letting the PC to accept unsig
Greetings. After a hard drive crash recently, I'm trying to restore some programs. I've been attempting to install the QSI Programmer, but I keep getting a message after letting the PC to accept unsig
|
By signalman11
·
|
|
Changing sound on a Titan-U 6 messages
I have two Titans that were set up for steam. I want to load the Alco sound into them for two RS3 I want sound in. Can someone help me with this? I do have the QSI programmer and the old web site with
I have two Titans that were set up for steam. I want to load the Alco sound into them for two RS3 I want sound in. Can someone help me with this? I do have the QSI programmer and the old web site with
|
By Jay Beckham
·
|
|
Programming Titan with NCE 3 messages
As I recall in programming the basics e.g. address with NCE, I can only program on the Main??? I do have the programming booster running to the programing track. Might that programing with the NCE cab
As I recall in programming the basics e.g. address with NCE, I can only program on the Main??? I do have the programming booster running to the programing track. Might that programing with the NCE cab
|
By Jay Beckham
·
|
|
Quantum Programmer 8 messages
I've looked everywhere online to buy a quantum programmer. I can't even find one on Ebay. I have several locomotives with QSI decoders and really want to have the ability to upgrade firmware and sound
I've looked everywhere online to buy a quantum programmer. I can't even find one on Ebay. I have several locomotives with QSI decoders and really want to have the ability to upgrade firmware and sound
|
By Gordon Wayne Pruitt Jr
·
|
|
Replacement sound chip for GP7 6 messages
Hello Group. Can I please ask a question, I have gone into ‘search’ without any success, regarding a Life Like GP7 with a QSI sound chip as fitted by LL. I am unsure how old the loco is but it runs li
Hello Group. Can I please ask a question, I have gone into ‘search’ without any success, regarding a Life Like GP7 with a QSI sound chip as fitted by LL. I am unsure how old the loco is but it runs li
|
By
James Lucas
·
|
|
Issue with Quantum Revolution-U decoder 4 messages
I have the above decoder (product code 4050-718) installed in a Proto 2000 2-8-8--2 Mallet. The unit used to work well on both DC and DCC. The loco has been in storage for 4 years whilst we moved hous
I have the above decoder (product code 4050-718) installed in a Proto 2000 2-8-8--2 Mallet. The unit used to work well on both DC and DCC. The loco has been in storage for 4 years whilst we moved hous
|
By larmour@...
·
|
|
Stay alive 2 messages
Kelly and others Do know of a stay alive for these QSI in my two Atlas Gold series O Scale GP9 engines? Or perhaps a homemade one such as including in last month's issue of Model Railroad Hobbyist. Th
Kelly and others Do know of a stay alive for these QSI in my two Atlas Gold series O Scale GP9 engines? Or perhaps a homemade one such as including in last month's issue of Model Railroad Hobbyist. Th
|
By Jay Beckham
·
|
|
Setting recommendations for Titan EMD E6 Dual prime movers 3 messages
Group, Does anyone have recommendation for settings to get the best dual prime mover sounds, these will be installed in a S-scale EMD E6 A and B units? Any help will be appreciates!! are there other s
Group, Does anyone have recommendation for settings to get the best dual prime mover sounds, these will be installed in a S-scale EMD E6 A and B units? Any help will be appreciates!! are there other s
|
By Ed.Sauers
·
|
|
NCE Advanced consisting and QSI model 106 (Atlas) 19 messages
What follows appears to be a firmware bug in ho106f00 , build date 14-July-2004. Is this a bug, and is it addressed in a newer version of firmware? Summary: use of CV29 "direction bit" interferes with
What follows appears to be a firmware bug in ho106f00 , build date 14-July-2004. Is this a bug, and is it addressed in a newer version of firmware? Summary: use of CV29 "direction bit" interferes with
|
By Walt Weber
·
|
|
Relocating/replacing capacitors and filing edge of board on Titan-SD 15 messages
I have two HO Atlas Dash 8-40CWs with factory installed QSI Titan-SD (Small Diesel type board) decoders. A while back one of them stopped making sounds, and for a while I thought the decoder was at fa
I have two HO Atlas Dash 8-40CWs with factory installed QSI Titan-SD (Small Diesel type board) decoders. A while back one of them stopped making sounds, and for a while I thought the decoder was at fa
|
By benmartinrr@...
·
|