Enviado do Email para Windows 10 De: Tom Compton tomcompton4114@... [QSIndustries] Enviado:sábado, 23 de dezembro de 2017 19:24 Para: QSIndustries@... Assunto: [QSIndustries] I have a Proto 2000 F7 wi

Titan U decoder. I'm upgrading from ver. 9.2.3 (2013) to the latest ver. 9.3.2. (2015). I set everything up, including all the User sound records and CV adjustments. Loaded the sound set 1140 (EMD 645

Are parts available for MTH (o gauge) equipped with the QSI DRCU reverse units? Thanks Tom Weaver

I have been saving a new QSI Titan U for a special install. Opened up the package plugged into my decoder tester. All sounds are good, light functions OK, Motor ACKS when writing and reading CV's but

I have one brass 4-8-2 with a titan decoder. can motor, keep alive, speaker in smokebox, runs and sounds great. And an Athearn Genesis Challenger with a titan. Two speakers, one in cab, one in smokebo

Today I have had some decoder pro issues, somewhat self inflicted. The loco I was working with has a QSI Version 8 Titan. Now that I have the decoder pro issue behind me I have been running, testing,

I need help in wiring up the decoder in the photo, i.e., where on the board do I connect wires from the trucks, and wires for the motor, speakers and headlights? The decoder comes from an older Proto

Hi Kelly, Many of us are anxiously awaiting the new upgrades and sound sets that various members have suggested and requested. Any news you'd like to share with us? Personally, I'm looking forward to

I have a pair of Proto 2000 GP-9s that were set up to run long hood forward. They have version 7 chips in them. I can't remember which CV needs to be changed to make the short hood the correct forward

I have a programming track on the main. With the use of a DPDT toggle I have safety sections on both sides of the programming track. The input comes from the NCE command station. I am thinking about a

I have a Qsi steam version 6 chip from 2006 in a BLI paragon HO Locomotive. I was wondering if I obtain a QSI programmer, can that chip be flashed with the latest firmware and if so, where to get the

Now that Thanksgiving is behind us, and most of us have had their fill of turkey, its time for some serious model railroading. Dust off those idle trains and get busy. And don't forget, QSI is here to

I have some extra QSI OEM decoders. I read someplace that I need to use 1.5mm JST connectors. Is this correct? Tom in Texas

http://shedaker.wixsite.com/shedaker/applications Jay Beckham Building a large O Scale layout in Berkeley Springs, WV. Our Yahoo Group: Join: jaysoscalelayout-subscribe@... (The model railroad) View m

Hi, I need to pull all the .wav files that comprise a certain horn out of a .q2 file. Is there any way to do that? Thanks, Ben

Folks, Have for sale BRAND NEW, NEVER USED, QSI G Wire Receiver, and NCE G Wire Throttle. New in original packaging with documentation... Want $125 for the Receiver, $175 for the Throttle, sell as a p

Help. How to reset the Atlasrr HO H15-44 diesel locomotive. Thank you.vgnovaes@...

Several vendors have come up with wireless microprocessor boards that can receive commands from a handheld controller. Power to run the board and motor comes from a lithium battery rather than through

Greetings to All, I am relatively new to DCC so please excuse my ignorance. I have a Version 9 QSI equipped diesel locomotive and I would like to change CV 129.1.0 (Speed steps per notch). The factory

I would like more information about the purposes, locations and colors of the various lighting systems on a steam locomotive. My main interest is to relate them to the names used in the QSI decoder an