Well that would mean losing functions. QSI Titan has 23 wires. NMRA 21 Pin is a 22 pin connector with one removed for indexing. There is also 3 pins that do not map to QSI. I am not QSI but here is wh

Hello- I have been googling and translating like crazy and am hoping someone can help me here: I have a Tenshodo EF66 locomotive that I just bought while in Japan. Side node: really cool model! Can yo

I have a QSI SF 6 decoder that I would like to install on an Atlas Master Locomotive Series - Silver diesel. I do not have a wiring layout for this decoder. How to I find out where the wires connect?

Hi at QSI I sent you an email 4days ago regarding this locomotive and QSI system to establish the correct controller/transformer to use. Did you receive it, but are very busy and have not had a chance

Hi, I've got a HO Proto 2k with a Quantun factory decoder. I can't seem to get the rear (cab end) head lite to go on at all (works on DC) while the front works fine. Also, how do I increase the sound

Hi All, I got two Titan FX-DO decoders which work perfect in my G scale SD45s and are readily available, unlike the Titan G scale decoders. However, programming them is not the same but there is no ma

I sent QS Industries an email about 10 days ago and haven't gotten a response. No big deal, no rush, but when I tried calling them a couple times over the last week it went straight to voicemail both

Hello everyone. I have a QSI revolutionized an Proto Alco S1 Right now both headlights are on with function 0 turned off. I would like the front headlight to be on in forward whether moving or not and

have several atlas gold locos with the qsi sound installed. I want to add ditchlights, but have been unable to figure out light output programming. Is jmri the way to go that would be easier? Having t

I sent an email using the contact on the QSI website, Nothing. Same questions, availability and pricing for an installer. Nothing. I don't get it. Rick.

Steven Lansing wrote: That could be as Yahoo Groups tend to drop messages here and there. I've experienced times where I haven't seen either the original or a response, but I've seen subsequent postin

I have been tossing around the idea of of getting a QSI decoder with a Winton sound file. I did a quick check of JMRI and notice there is not a tab for a Winton sound file. Does this mean that it's no

Hi Kelly, As an installer i am wrestling with whether to install QSI Titans or not. What do you see in the future for QSI and the Titan decoder. Where do I source the decoders? I have updated to a win

I've managed to get Quantum CV Manager running with Driver 3.2 First I took a few steps from the instructions for installing the driver in Windows XP Vista or Win 7 which are in the Quantum Programmer

I have two of the Atlas F-M Trainmasters. There was originally a problem with the correct functioning of the headlight in the short end of the locomotives. Eventually, Atlas sent me new QSI chips and

I have a Quantum programmer and Quantum CV Manager Version 3.1.0.0 (Mar 14, 2016). I thought I've run it before on this computer, but now no-go. The programmer wants a driver version 3.2. but the read

I have converted a locomotive to battery power with Airwire radio control. I have added a switch to the setup so that I can disconnect power from the battery to the Titan-U decoder. When I flip the sw

I have 2 NIB QSI Solutions Titan-A boards a used Atlas OEM Titan and a lightly used like new condition QSI programmer for sale. $350 shipped. If interested contact me off list at nneverused@...

What is the maximum amp rating on the QSI Titan-U decoder for the motor outputs? Nicholas Geti