I am Pat Quinn. I am co-founder and co-owner of QSIndustries, Inc. - aka QSI ® in the model railroad industry. I want to welcome the model railroad community to this group. This group can serve as a g

Pat/all: Is there a way to get a good SHORT whistle on this loco? It seems like it is a cut off sound when you try it. (Using Digitrax Chief and DCC). Longer whistles are fine, but grade crossings are

Dear Group, I received my T1 last week and brought it to our club layout to run. We have a Digitrax Chief and are using DT400 IR throttles. I started out running the loco at the default address of “03

Enter your vote today! A new poll has been created for the QSIndustries group: QSI would like to know how you run your HO trains o DC (conventional) only o DCC only o Both DC and DCC o DC at home DCC

First let me say THANK YOU !!!! My first introduction to your product was the Broadway Limited Hudson with QSI Sound. It Spoiled me. The range and effects offered is the best I have ever seen or heard

Hi Pat, Are you going to be offering any diesel sound modules for O scale(not 3 rail O gauge) that will work with DCC(sound seperate from the motor decoder would be preferred)? ....dave

Thanks for starting this group, I'm sure I'll learn a lot from it. As an interested and involved N scaler and DCC user, it seems to me the market for sound units for N scale (currently mostly DCC, but

Thank you Pat for the formation of this group. First question and it's a tough one. What can you tell us about the MTH affair that won't infringe on any legal proceeding or, of course things that must

Hi Pat and All, I want to thank you for starting this group. I'm NCE DCC and have a fleet of about 250 locomotives (mid 50s era) and it's climbing. Most all of the road power will be in sets of three

Hello, Pat. I would like to add my thanks for starting this group. I have just received a new 2-8-2 from Broadway. I have been following the MTH issue on other sites, and note that the Regulated Throt

I was disappointed that the BLI 2-8-2 does not use a steam chuff cam. There is something annoying about a sound equiped steamer that is obviously out of sync. Does the QSI sound unit have a provision

Thanks for starting this list. It is indeed a plus for modelers that someone at QSI feels the consumer input of value. Sound was my main reason for going DCC. I realized DCC improved operation, but so

Just to be clear, I AM able to get a short whistle with the DT400R, plugged in or not makes no difference, BUT: I have to punch the whistle button just right - not too hard and not too long, or I get

I had the same problem as Larry Colacicco withQSI mikes. When going over switches , they would short out and completely shut down requiring a complete reset by removing the jumper on the board in the

Pat: Thank you for having the guts to start this list. I am very impressed when a manufacturer will go the extra mile to solicit unbiased input from their customers. You have caught my attention. I wi

Pat, Let me add my wishes for a large scale aftermarket DCC Sound decoder which would also operate on a standard DC 2 rail layout. I can tell you from experience that there are many O scale 2 railers

Pat Quinn, Could you please respond to post #16 regauarding the use of smoke units in both the BLI and the Lionel "HO" steam engines with the QSI sound decoders? This would be much appricieated for it

Pat, thanks for creating this group and I hope things go in your favour in your battle with MTH. A quick question regarding the BLI Hudson wththe QSI sound system. As I work some 850klms from home I d

Hi Fellow Listers I have joined because I am in S Scale and have heard that QSI might have units available in S Scale. I currently am using Soundtraxx units. Has anyone on the list used Soundtraxx uni

I too am in S Gauge and would like to find more variations in the sounds produced. I am specifically interested in sounds produced by NYC steam and diesel locomotives. I have talked to Soundtraxx in t