Tim, Are you looking on the WIX site? Titan ET Steam Files for Large Scale (wixsite.com) Ed Sauers Virus-free. www.avast.com

Banjo Trains, Can you upload a photo of the decoder, also it would be nice if you include your name so we know how to address our replies. Ed Sauers Virus-free. www.avast.com

Paul, try this https://shedaker.wixsite.com/shedaker/titan-u Ed Sauers

Paul, It's there, try this link. then select the install guide. https://shedaker.wixsite.com/shedaker/revolution-era-documents Once there select the product tab, then select HO sound and power decoder

Greg, The following is my opinion on the QSI support effort. Most of the members on this group are long term supporters of QSI, we stay in support of QSI because the Titan is still the best and most s

Greg, go to this site and download the Quantum upgrade and CV manager. https://shedaker.wixsite.com/shedaker/revolution-era-documents Ed Sauers

Keith, Are you sure about this, all my Titans respond to F6 for startup and F9 three times for a complete shutdown!! Ed Sauers

Jay, When you power up your NCE system press the "prog" button (bottom left) until you see "use program track" if you select this it turns off the mail power and you can use the program track to make

Gordon, Contact Kelly Dorf, he monitors this list. kell.dorf@... it might take a while for him to reply but he will get back to you. Ed Sauers

Philip, Since nobody else has replied I will chime in here to try to help. Are you passing the magnet over the decoder while the power is on and you are getting at least 7 volts DC to the decoder? Onc

KJ, Thanks Ed Sauers

Group, Does anyone have recommendation for settings to get the best dual prime mover sounds, these will be installed in a S-scale EMD E6 A and B units? Any help will be appreciates!! are there other s

Jon, You would need a Titan Decoder or QSI's Large scale decoder offering, and QSI does have a Winton 201A sound file, Here is a link to their site http://www.qsindustries.com/ Ed Sauers

MfG, This is just for the U, with the A format you have to find the 12v and ground connections. I will look to see if I have a picture of the A board with where these connection points are. Will reply

MfG, Go to this link and look at the area about installing a "smart cap" this should answer your question. https://209775f7-f46c-4729-9d78-7cc0c3414b15.filesusr.com/ugd/0f7119_a38d120ba23640d5878a0849

MfG, Negative, in my message KA stands for an external KA that is wired to the blue and BlK/White strip ground. In my case it is a TCS KA3. Ed Sauers

Group, If I have a KA installed do I still need the small capacitor that comes with the Titan Decoder?.....seem to me I remember Josh saying it was not necessary if a KA was installed!!! Ed Sauers

Dan, I think the driver problem on happens when MS sends out a MAJOR update, some minor updates don't seem to cause the problem. It is stall a pain though!! Glad you got it working Ed Sauers

Dan, In order to install the Si Labs driver you must 1st restart your machine by holding the"shift" key depressed to set it to allow you to install an unsigned driver. Best if you google "windows unsi

Bruce, This is the site you want http://www.qsindustries.com/index.html Ed Sauers