|
wiring diagram
Check your email. Lou
By
Lou
· #18767
·
|
|
Where is the official download site for CVManager and Quantum Upgrade programs?
QSIS is the owner of some of the decoder designs, and sound files, and software. Since QSIS is long gone there are not and will no longer be updates. There really is no need for updates as the product
QSIS is the owner of some of the decoder designs, and sound files, and software. Since QSIS is long gone there are not and will no longer be updates. There really is no need for updates as the product
|
By
Lou
· #18758
·
|
|
Older QSI decoder
Morgan, Don't try to grasp every detail in the programming manual. Determine the first thing you want to change and focus on that. The manual will explain what is needed for that particular function a
Morgan, Don't try to grasp every detail in the programming manual. Determine the first thing you want to change and focus on that. The manual will explain what is needed for that particular function a
|
By
Lou
· #18709
·
|
|
Flashing headlight?
Try setting up the head light as a ditch light that is on all the time. Of you have dual headlights maybe you could set the up as alternating lights. Lou
Try setting up the head light as a ditch light that is on all the time. Of you have dual headlights maybe you could set the up as alternating lights. Lou
|
By
Lou
· #18684
·
|
|
Older QSI decoder
Sorry, it is Kelly.dorf at gmail.com I don’t have any knowledge about decoders with jumpers for a reset, sorry. Can the DCS50 do service mode programming? If so, set up a program track separate from t
Sorry, it is Kelly.dorf at gmail.com I don’t have any knowledge about decoders with jumpers for a reset, sorry. Can the DCS50 do service mode programming? If so, set up a program track separate from t
|
By
Lou
· #18607
·
|
|
Older QSI decoder
Pennsynut, Perhaps you could provide us with your real name, it makes it much friendlier on here. If you have a QSI old decoder I would suggest that you get with Kelly Dorf at QSI. First off, your dec
Pennsynut, Perhaps you could provide us with your real name, it makes it much friendlier on here. If you have a QSI old decoder I would suggest that you get with Kelly Dorf at QSI. First off, your dec
|
By
Lou
· #18602
·
|
|
Sunset 3rd GGD SD9
Jim, All the Titan decoders have the same software. They only differ in shapes and sound files. You can program any decoder to be what ever you want from it. Lou
Jim, All the Titan decoders have the same software. They only differ in shapes and sound files. You can program any decoder to be what ever you want from it. Lou
|
By
Lou
· #18588
·
|
|
Sunset 3rd GGD SD9
Jim, I just noticed you have version 8 software. You might want to consider a sound upgrade to Ver. 9. It would be file number 1115-567v9-3-2.q3. This is the last version made before QSISolutions shut
Jim, I just noticed you have version 8 software. You might want to consider a sound upgrade to Ver. 9. It would be file number 1115-567v9-3-2.q3. This is the last version made before QSISolutions shut
|
By
Lou
· #18587
·
|
|
Sunset 3rd GGD SD9
OK, Jim. Hewer we go. It might help if you read these tips first, then try changing stuff. First, go to https://shedaker.wixsite.com/shedaker/titan-ho-documents . Under that tab these manuals may help
OK, Jim. Hewer we go. It might help if you read these tips first, then try changing stuff. First, go to https://shedaker.wixsite.com/shedaker/titan-ho-documents . Under that tab these manuals may help
|
By
Lou
· #18586
·
|
|
Sunset 3rd GGD SD9
Jim B. To help, we need some more information. It will also help us to know what your DCC system is and how are you programming the decoder. Do you use JMRI or maybe QSI CVManager? Is this a factory i
Jim B. To help, we need some more information. It will also help us to know what your DCC system is and how are you programming the decoder. Do you use JMRI or maybe QSI CVManager? Is this a factory i
|
By
Lou
· #18573
·
|
|
Programming Titan with NCE
Jay, If you have the QSI programmer connected and working you can program just about any way you want. Using the NCE system (1) Use the NCE system as you always have using the index CVs as needed, a r
Jay, If you have the QSI programmer connected and working you can program just about any way you want. Using the NCE system (1) Use the NCE system as you always have using the index CVs as needed, a r
|
By
Lou
· #18571
·
|
|
Horn change
Bruce, I would put the engine on a program track and see if I could read that CV. Then I would make one change and write it to the decoder to see how it works. I would not use a write all command, esp
Bruce, I would put the engine on a program track and see if I could read that CV. Then I would make one change and write it to the decoder to see how it works. I would not use a write all command, esp
|
By
Lou
· #18490
·
|
|
CV Manager
Jay, Not quite sure what you are asking but I’ll give it a shot. CVManager is a program like Decoder Pro for programming and storing decoder information. It is the best, IMO, for programming QSI decod
Jay, Not quite sure what you are asking but I’ll give it a shot. CVManager is a program like Decoder Pro for programming and storing decoder information. It is the best, IMO, for programming QSI decod
|
By
Lou
· #18489
·
|
|
QSI titan not on JMRI?
Bruce, Do you have a program track booster on your NCE system? That will be needed to read the QSI decoders. If you do, then you need to check the wiring from the NCE program track outputs all the way
Bruce, Do you have a program track booster on your NCE system? That will be needed to read the QSI decoders. If you do, then you need to check the wiring from the NCE program track outputs all the way
|
By
Lou
· #18437
·
|
|
move to 64 bit
Dave, What drivers are you using? I had my drivers wiped out in the last update, nowhere to be found, on all 3 computers I use. Because my train PC has limited programs on it I even did a complete rei
Dave, What drivers are you using? I had my drivers wiped out in the last update, nowhere to be found, on all 3 computers I use. Because my train PC has limited programs on it I even did a complete rei
|
By
Lou
· #18416
·
|
|
NCE Advanced consisting and QSI model 106 (Atlas)
Are you changing CV 19 when you make the consists? Lou
Are you changing CV 19 when you make the consists? Lou
|
By
Lou
· #18385
·
|
|
QSI decoder in Atlas GP40 not working
Hi, Rick. Check all the wiring from the track to the decoder to make sure they are connected properly, soldered is best. Tug every connection to make sure it is actually connected. Check the wiring fr
Hi, Rick. Check all the wiring from the track to the decoder to make sure they are connected properly, soldered is best. Tug every connection to make sure it is actually connected. Check the wiring fr
|
By
Lou
· #18377
·
|
|
Total Frustration with making a locomotive connection with Titan-U
Happy New Year folks. I have made some progress on the programmer, but not as complete as I wanted. I originally had the programmer working with the QSI programs and JMRI. I have the programmer workin
Happy New Year folks. I have made some progress on the programmer, but not as complete as I wanted. I originally had the programmer working with the QSI programs and JMRI. I have the programmer workin
|
By
Lou
· #18374
·
|
|
Total Frustration with making a locomotive connection with Titan-U
Bruce and Kelly, It seems that update 1903 wiped out older drivers but left something hidden so the driver updater sees it and wants the old one removed, but the machine doesn’t know anything about th
Bruce and Kelly, It seems that update 1903 wiped out older drivers but left something hidden so the driver updater sees it and wants the old one removed, but the machine doesn’t know anything about th
|
By
Lou
· #18368
·
|
|
Total Frustration with making a locomotive connection with Titan-U
Bruce, I would search for QSI and then Quantum. But not the whole string. Do not use automatic replace. I am using Win 10, both Home and Pro., ver 1903. I have not been able to get the SILabs driver i
Bruce, I would search for QSI and then Quantum. But not the whole string. Do not use automatic replace. I am using Win 10, both Home and Pro., ver 1903. I have not been able to get the SILabs driver i
|
By
Lou
· #18359
·
|