Which QSI decoder is most like the one being factory installed in the Sunset 2-6-0's? Tom Pearson

I replaced the stock speaker(16 ohm impedance) with a 8 ohm high bass speaker and now the decoder shuts down when I blow the horn. Is the amp really that sensitive to a change in impedance? Tom in Tex

The B unit decoders appear to have connectors for the forward and rear lights. Can I hook up lights to these outputs or are the outputs disabled in the software. Tom in Texas **************Wondering w

Setting CV11 to 0 worked the 2nd time we tried it. We also got the following information from the Easy DCC group The new 629 firmware is a marked improvement - BUT - CVP warned of a few small changes

Setting CV11 to zero didn't help the problem and "application" to join the EasyDCC list hasn't been approved yet

One of my friends is having trouble withconsisted QSI locomotives?using his EasyDCC system.? The motor in the 2nd locomotive seems to cut out when the horn?(or sometimes another function button) is de

While operating a pair of new Walthers Proto GP20's, we noticed that the 2nd locomotive would stop when F2 was depressed to blow the horn. Tom in Texas ************************************** See what'

I can't seem to get any sound out of the locomotive Here are my observatinos The engine runs on both DC and DCC. I can change the address from 2 to 4 digits using OPS mode programming I can turn the l

I have a Proto/Walthers GP9 which doesn't want to stop at speed step 0 even after setting CV's 2, 3, and 4 to "0" Tom in Texas

Do the electronics in the sound equipped diesels have enough capacity to run 2nd motor in a permanently coupled non sound equipped locomotive?

I am not planning to go to San Antonio tomorrow. Did you decide on a 1 or 2 PM start time? Would you like me to make up some "dividers" and/or labels for the car card racks?