Gerry, Thanks for the info. My vote is to get rid of the whine as it overpowers the engine exhaust sound. Rick

Hi John, A frend had this same problem with two of his RSD-15s, and we found that the center axle sat at a lower position than the outer axles. We disassembled the trucks and bent the bearing

Thanks Gerry Adrian g_pruss escribi:

Adrian, 101 is for the SW7 with volume pot (BLI) 155 is for the SW7 with Reed Switch (BLI) 133 is for the SW8 with Reed Switch (Life Like) 101 and 155 use the same sound records. 133 uses the same

Gerry would you please inform me the correct upgrade NBR for SW8 Proto.. There are 3 nbrs 2 for BLI and one for proto in you page, but looking on walthers they are planning to stock only the BLI

Jerry, The Quantum Programmer appears ready for release except for minor software issues brought forward by beta testers. I am addressing these issues now and expect to have new versions of the

Rick, that from new sounded as if it has a turbo as it has a very distinct whine. Nothing like the E7 or other first generation EMD's I have. <<< The Life Like GP9, model 112, does not have a turbo

g_pruss@... writes: As always, thank you Gerry for a quick response. I have the Programmer on order and look forward to it's release. See ya,

I had a similar problem on my BLI unit, and found a defective speaker to be the culprit. Suggest you contact them for a replacement. texpearson@... wrote: I can't seem to

Hi Gerry, Thanks for the quick reply. We'll try to convince the owner of the many benefits of DCC ;-) I think he will be happier it in the long run. Cheers, Kelly

Hi Rick; Check the archives for information on the GP9 sounds, and Gerry provided instructions in that series of notes on how to turn off the turbo whine. Nigel F Misso

Kelly, DCC. The plan for Analog DC was to offer an "Enhanced Quantum Engineer" in which the function of one of the buttons was to be modified to include selecting between Horn 1 and Horn 2. Due to

Hi All, Has there been any recent updates on the availability of the Programmer. I saw it demonstrated at the National Convention and it seemed to be ready. Thanks, Jerry

I've got a couple of the QSI RSD15 and one runs great, the other derails all of the time. I've checked the wheel gauge, it has good movement from side to side and up and down. Any body have any

Seeing as the first two things I was going to say already have been. I’ll put in my two cents about your front truck. I also have an RSD-15 and have found that there was a fault in BLI’s

Gerry, I just installed the new V7 chip in my BLI E7. It is really quite an improvement. Slow speed is great, notching and transition make the new chip well worth the wait. Thanks. I have a Proto 2000

Hi Folks, I have searched the archives and I cannot find any reference to the ability to change the horn sound on the Eureka 620/720 railmotor between the short 'toot' (city) and the long horn

So everything seems to operate correctly but there is no sound. Are the speaker wires intact and connected to the speakers? Gerry Pruss QSI programming magnetic with

What about F8?

I can't seem to get any sound out of the locomotive Here are my observatinos The engine runs on both DC and DCC. I can change the address from 2 to 4 digits using OPS mode programming I can