Added 2 pics in "SD40-2 decoder pinout". One shows the caps relocated to light-stand at rear. Thanks Erik

John, you are still not understanding... You have listed everything except what I am asking about. Were you able to read my page? if not, please email me greg@... and I will send an email that the

Greg, In message 18866 I stated what I get when RH click on the bar the select properties: Quantum 1a Firmware Update Application Version 1.5.0.0 December 29.2009 And Quantum 2 and 3

Kelly Dorf can answer that question. Dave Hastings

Can you post some clear closeup pics in an album appropriately named in the Photo section? -- John Burkhardt South Africa Where the sun always shines and Steam still reigns!

It has a volume pot rather than a reed switch.

I bought a Broadway Limited SD40-2 in January 2005. Does anyone have a pinout of the decoder that would have been installed in that timeframe? It is slightly different from the later pre-Revolution

Said file is also in the files section. In the 'QSI Driver' folder Talmadge C 'TC' Carr Sn42 and Hn42 somewhere in the wilds of the Pacific Northwest group_list@...

Well bad on me, I didn’t know attachments would work. Frank

Thank you TCC!

I also had this problem with Q1 decoders in my ESU ECOS. I solved this problem by adding a 27 Ohm resistor in series with one of the programming track wires.

I don't want to get into a competition on who's method is right or wrong, but there's more information out there, and as I mentioned, different versions of CVManager can do different things, and the

OK I created a folder caller 'QSI Drivers' I will upload all the drivers I have and maybe some new ones if I can find them. Does anyone know what SiLab chip is used in the QSI hardware. TCC:}

Talmadge C 'TC' Carr <group_list@...> added folder /QSI Drivers The following files have been uploaded to the Files area of the QSIndustries@groups.io group. /QSI Drivers/Windows

A setting needed redoing. I fixed it as one of the owners. Members can now upload. If the problem persist send ME another note TCC:}

For some reason members (like me or Frank, or you) are not permitted to modify the Files section in any way. Can't upload files or even create folders. Seems very counterproductive. Not sure what

Attached is a file sent from Frank that he was trying to upload to the files section for the group. He wasn't successful and neither was I so here it is for your own personal use. This is not

first, looking for the firmware version of the programmer, in the menu as I describe. my site is www.elmassian.com, I guess your email cut off the link I sent... 1. the link is fine here on the

Greg, This is what I get from my QSI PC software: Quantum 1a Firmware Update Application Version 1.5.0.0 December 29.2009 And Quantum 2 and 3 Firmware Update Application Version

Actually Q2 works on the revolution and other Q2 decoders and the Titan (Q3). But I was asking if the QSI programmer diagnostics are in the Q1 software, thus verifying that the programmer is/is not