Hi Bob, See the "Files" section (above). KJ

I want to put some keep alives in some Titian A. I found a connection point mark +12 volts, would I connect the positive wire to this point and where would I connect then negative wire to. Any help

Hello, I have a train set with transformer and track to sell. My father, Art Boynton of the Scaled Tin Rail, built for my son. With his passing several years ago, the love of the set is gone and we

I may be off on the year the unit was made since I bought this on the 2nd market but it is a Titan. I found the problem. I was using CV manager and the output map didn't show the Xing assigned to

Hmmmm... That’s a puzzler. My first thought was that it sounded like Phoenix or Soundtrax decodersthat can be set to trigger the crossing signal sequence whenever you speed upabove a threshold

Bill, Yes, did mean diode (and not another relay). Thanks for giving Eric the tech info behind it. Bill, I have O scale (2 rail) Atlas F 3 with a factory QSI decoder, I guess it was made about 2009.

2 things: You meant to say “...wire a diode across the DC coil terminals...” The relay will generate a high-voltage spike when the decoder tries to turn it off, which would fry the

Eric, the relay I have used is Taiko CX 10N. I looked on All electronics and they have this relay. Only difference seems to be mine has a 0 120 in the upper right hand corner and the one in their

Eric, Here are the markings on the boards: 1) ECBMTHP4 2) L7 BM1 3) L NVO with 22 above the L 4) 9U94V0 PCBC FR4A Jim

Yes if can get me the info on the relays that would be great. Eric

Datasheet for the JST connector: http://www.jst-mfg.com/product/pdf/eng/eZH.pdf Also insulation displacement type (only the wire ends, use same pcb headers from above):

On the V7 OEM decoders (the ones with the big removable chip), is there a chuff input? If so, where? Also, can anyone tell me the size of the 2-pin JST plugs/sockets? Thanks

I have used low amp relays for this purpose in a couple dozen Titan U installations. I am not at home, but if you need it, I will try to get the make and model number of the relays I used. Been

It looks like the only high current output is for the motors -- max 2 Amps stall. The remaining function outputs are only 100 ma, i.e. LED current. You could install a small solid-state relay, where

Hi group I've wired smoke units in G scale using the Large Scale Titan decoder. Now I'm getting ready to put a Titan U into an HO scale engine. I'm not seeing anything in the Titan U installation

Sam, I suspect that (unless you just made the CD yourself (using the latest files from the download site) your CD has older versions of the software. Peteski ---In QSIndustries@..., <svastano@...>

Are you selling the programmer too? The software is downloadable as well as the manual. Greg

OK, never saw he sold a version of the Titan with the pins cut off.. I stand corrected. Although since I bought the remaining stock, and they all have pins on them, it's kind of a moot point. But you

Greg, I humbly beg to differ... From http://shedaker.wixsite.com/shedaker/large-scale-sound-decoders: Titan LargeScale Variants Titan Aristo™ - P&P for Aristocraft G Scale

A few points of clarification, to help out: 1. there is no thing as a Titan Magnum... a Titan is only made with one hardware version, it has 3 sets of screw terminals on it. 2. the "Revolution" or