Christopher, You should be using the the driver that states it's for SiLabs Drivers for Windows: 2k, XP, Vista 32, 7, 8, 8.1, 10 Ed Sauers

Are you getting an error? Or does the programmer appear to be working on the computer side, but just doesn't seem to be doing anything? I'm guessing here, but if the resister is blown it'd be the

My Quantum Programmer suddenly stopped communicating with the test track I use for programming. The first indication was not being able to read a decoder using the Q upgrade, same result using the CV

It's all covered on page 13 of the Titan U install guide found here: http://media.wix.com/ugd/ 0f7119_ a38d120ba23640d5878a0849026aee 26.pdf No need to remove anything. Just connect the blue wire on

I'm about to install a Soundtraxx Current Keeper(CK) in a diesel with a Titan-U already installed (and working beautifully). From what I've found on Mar Gurries DCC web site the Soundtraxx CK is

As I remember cut the reed switch out . I did it on an atlas engine long time ago and it solved the resetting problem Gene Gleason

Had a friend show up with a NIB Atlas Ho scale Trainmaster put it on my programming track and it tried to reset constantly. This is a version 7 with a reed switch. I am thinking it has a bad reed

Great to hear :) On Friday, November 11, 2016 1:11 PM, "Benjamin Shell benjaminshell@... [QSIndustries]" Hello again everyone, I just wanted to follow up here since I did

Hello again everyone, I just wanted to follow up here since I did receive some direct replies to my inquiry. Josh and QSI Solutions are alive and well, and large scale Titans are available. I just had

Are large scale QSI Titans available anywhere? I was able to find a couple more this last summer, but now a friend of mine wants one and can't find any. His preferred dealer said: "We unfortunately

Yes it does, thanks. I use a NCE 408 in a pair of Weaver RS11 and run both without issue. I want to replace that with the QSI board to add sound.

This is the answer I received from engineering: We don't have a rating, but on an OEM Atlas engine will do at least 4 amps. He would be hard pressed to overload it. I hope this helps Kelly

I would also be interested if QSI could add such a feature :) "I see that Soundtraxx has added an Independent Brakefeature. Okay, it's not as realistic as the QSI fully adjustableAutomatic

I am trying to figure out the amp rating for a QSI 4000 hardware series decoder, installed as OEM in an O Scale Atlas engine. Using the Q2 upgrade & CV manager programs has not yielded any

Thanks Gerry! Good to know when I'm setting up consists for others at the club. I read that the Tsunami 2 is capped at 255. Personally, I run QSI lashups with very high decel momentum. It adds

KJ, The total value goes all the way to 382 (255 + 127). Gerry Pruss QSI

Addendum to request: I see that Soundtraxx has added an Independent Brake feature. Okay, it's not as realistic as the QSI fully adjustable Automatic (train) 'Air' brake but it is setup as a

Hello all, I guess this question is also for QSI tech dept. I realize that (user input) total acceleration or deceleration momentum is calculated by adding CV3 + CV23 = acceleration or CV4 +

Hello all, A couple of questions/requests: Some of the members of the club are in possession of the relatively modern Genset locomotives. Is QSI planning on recording the Genset (or modifying

Hi Jeff, Do you have a keep alive type device installed? If so, disconnect it and redo the Quantum Upgrade. Then reconnect the keep alive type device. Cheers, KJ