Date   

Re: Where is Q2Upgrade 1.13.0.2

dslperico
 

Thanks, Kelly!  I am able to move the locomotive using short address 3, but not its long address 902, with my NEC Power Cab, however, there is no sound.  When I try to retrieve Locomotive Information using the QuantumUpgrade application, the progress bar only goes to 40%, then I get a message box "Unable to read Mfg ID. Status=1."  I get a solid red light on the dongle when I start QuantumCVManager.  So I input 3 as the primary Decoder address.  When I click the "Program Any CV" button and input 55, 1, 1, 96 respectively (for a Nathan M5 horn) for CV, PI, SI and value, the red light on the dongle does not, as I understand it, go on and off as it should when programming.

What step am I missing here or doing wrong in order for me to get the Titan-U sound side of the decoder to work??


Re: Where is Q2Upgrade 1.13.0.2

kelly dorf
 

Hi,

I may have left that off the CD.  I will look for a direct link for you.

Kelly


Re: Where is Q2Upgrade 1.13.0.2

Talmadge C 'TC' Carr
 

There are new win10 drivers but it is a bear to install.  Others have been successful and have shared their stories here on the list.  I have not yet tried Win 10.
TCC:}


Where is Q2Upgrade 1.13.0.2

dslperico
 

I have a Titan-U and copied the files of the CD.  I upgraded the driver to 3.2, which shows in Windows 10 Device Manager.  The ReadMe File 27-Jan-10 states, "you must also install...Q2Upgrade 1.13.0.2"  However I cannot find the executable to install that.  Where is it?

In my C;\Program Files directory I have:   Install_Q1aUpgrade_1_5_0_0.exe ; Install_QCVM_3_1_0_7.exe ; Install_QuantumUpgrade_3_1_0_0.exe ; and a QP_USBXp_DriverInstall  directory with a QP_USBXp_Installer.exe file.  But I don't find anything for  Q2Upgrade 1.13.0.2. Where do I find this executable?

Have not been program my Intermountain F7 and wonder if that is the reason why?


Re: Sound files for QSI revolution

Alan Wightmore
 

Thanks ,you fixed me up in a different Email.

Alan.

On Nov 2, 2019, at 1:46 PM, kelly dorf <kelly.dorf@...> wrote:

Hi Alan,

Which files specifically?  We have them, and I can email whichever ones you want.

Kelly

On Sat, Nov 2, 2019 at 11:51 AM Alan Wightmore <powerguy@...> wrote:
I am in need of some sound files for QSI revolution. The site I used before no longer has them. Is there a new site for downloading files? I’m trying to help out a local modeller with reprogramming.

Thank you Alan.




Re: Sound files for QSI revolution

kelly dorf
 

Hi Alan,

Which files specifically?  We have them, and I can email whichever ones you want.

Kelly

On Sat, Nov 2, 2019 at 11:51 AM Alan Wightmore <powerguy@...> wrote:
I am in need of some sound files for QSI revolution. The site I used before no longer has them. Is there a new site for downloading files? I’m trying to help out a local modeller with reprogramming.

Thank you Alan.


Sound files for QSI revolution

Alan Wightmore
 

I am in need of some sound files for QSI revolution. The site I used before no longer has them. Is there a new site for downloading files? I’m trying to help out a local modeller with reprogramming.

Thank you Alan.


Re: #LastOfYahoo Re: Driver modifications for Quantum Programmer #LastOfYahoo

kjlovesya
 

Hi Lou,

  You asked, "What system did you get the driver to work on?"

  The laptop is an older Lenovo (IBM) with Windows 7 Professional operating system.   The club layout uses NCE systems, including a Powercab / USB interface for the programming track.    I have yet to test if the just re-installed NCE Silabs driver is now conflicting with the QSI Silabs driver.

  It seems the QSI Silabs driver must be installed first.  So far so good.


KJ


Re: Moving Time

peteski7
 

You must be lucky TC!  The group I'm migrating is still 493rd in the queue (and in a day and half only moved down from 511 to 493).  :-(
Peteski


Kelly Dorf

Leonard Stern
 

Thanks guys; Kelly has contacted me. Leonard


Re: Kelly Dorf

mike brady
 

On 11/1/2019 4:00 PM, Talmadge C 'TC' Carr wrote:
qsindustries224@...

Or he may just answer you:)

TCC:}


Re: Kelly Dorf

Talmadge C 'TC' Carr
 

qsindustries224@...

Or he may just answer you:)

TCC:}


Kelly Dorf

Leonard Stern
 

What is the best email to get directly in touch with Kelly Dorf  of QSIndustries.

Thanks

Leonard Stern


Re: It Is Done!

Talmadge C 'TC' Carr
 

I just added two topics to the group with emails that missed the transfer.  They are on the website but should not resend.  As these topics were finished on the Yahoo list they should not need further comment here.  That should be all activity I need to move.  There were no files or photos to move.
TCC:}


#LastOfYahoo Hissing Sound at 0 off at 1 Expan #LastOfYahoo

Talmadge C 'TC' Carr
 

I have a custom installed QSI sound decoder in my RS3. It has a loud hissing noise that starts at 0 and turns off at 1. In idle it is too much. Is there any guidance on what that sound is? How to turn it off or at least lower the volume? Thank you. MV

Hi Murray,   I have sent you a replacement, let me know how it works out.
 

Kelly

MV,

Do you have any documentation for the decoder? Do you know who installed it?/ When was it installed?  If you cannot identify which decoder you have, can you possibly provide a picture of the decoder? You haven't provided enough info for members of this group to help you out.

Ed Sauers

Thank you Ed. I’ve heard from Kelly at QSI and he is sending me a replacement. We are all good. My friend Joe Warner reached out to Kelly directly.

 

My friend Lathan Sanford installed it for me.

Thank you Kelly. I appreciate your help. This is AMAZING service from QSI. I’m really impressed.


 

 

 


Re: #LastOfYahoo Re: Driver modifications for Quantum Programmer #LastOfYahoo

Talmadge C 'TC' Carr
 

Sorry for the slow response, I have been out of town and under the weather.. Sorry for not being more specific on the group name. It is JMRIusers which is the one that has all the converted messages from Yahoo.  Here is a link to the conversation: https://groups.io/g/jmriusers/message/53630?p=,,,20,0,0,0::relevance,,%22QSI%2C+JMRI+and+the+Mac%22,20,2,0,19501924

 

What system did you get the driver to work on? The instructions for the JMRI topic is about a few things and references on how to modify the .inf file to add the virtual com port. This allows JMRI to work with the QSI programmer.

 

Ass I said, this worked for me for a while on Win 10 until an update killed it. I haven’t tried ver 3.2 as I was hoping to get current drivers working so I didn’t lose the programmer with the next update.

 

Hope this helps.

 

Lou


Re: #LastOfYahoo Re: Driver modifications for Quantum Programmer #LastOfYahoo

Talmadge C 'TC' Carr
 

Hi Tom,
 
  Yes!  You are correct.  Our club programming track is an NCE Powercab, connected to JMRI via USB board.   This requires the SiLabs driver (different than the QSI SiLabs driver).
 
 
KJ


Re: #LastOfYahoo Re: Driver modifications for Quantum Programmer #LastOfYahoo

Talmadge C 'TC' Carr
 

KJ,
As far as I know, JMRI has no Silabs (or any other external) drivers. Is this driver you are referring to perhaps for another system you are interfacing to your computer like NCE or Digitrax? 
 

Tom Wilson

Colorado Springs, CO


Re: #LastOfYahoo Re: Driver modifications for Quantum Programmer #LastOfYahoo

Talmadge C 'TC' Carr
 

Lou, as Dapenguin mentioned, there are more than one JMRI forums on group io.    I searched for the post #53630 and found none.
 
 
However, I did manage to finally get the SiLabs 3.2 driver installed.   In order to facilitate this, I had to uninstall JMRI and SiLab drivers (both QSI's and JMRI's).  I even edited the registry (removing all signs of QSI).
 
  I then rebooted, disabling driver signing and completed the installation with no hitches.   I then loaded QCVManager, Quantum Upgrade and Q1a Upgrade with no problems.
 
 I have yet to reload the JMRI SiLabs driver.   I don't know if that's going to mess things up or no.
 


Re: #LastOfYahoo Re: Driver modifications for Quantum Programmer #LastOfYahoo

Talmadge C 'TC' Carr
 

Hi Lou,
 
  I looked for post number 53630 on the JMRI groups in Groups io and found no such number.   Dapenquin notes that there are three different JMRI groups.   To which group are you referring?
 
 
KJ

761 - 780 of 19078