|
I can't wait for the QSX 4 messages
#qsx
I know Hans is crazy busy and everyone is having difficulty getting parts, but in so excited for any info on the QSX. It's everything in looking for in a QRP rig.
I know Hans is crazy busy and everyone is having difficulty getting parts, but in so excited for any info on the QSX. It's everything in looking for in a QRP rig.
|
By
Mitch - KY4LY
·
|
|
working with the QDX 13 messages
#qdx
I see the QDX on the QRPLabs website. Looks interesting and it looks like it is run via the USB port which means that it has to be connected to a computer with some software. So what software would I
I see the QDX on the QRPLabs website. Looks interesting and it looks like it is run via the USB port which means that it has to be connected to a computer with some software. So what software would I
|
By
Syd
·
|
|
Separate receive antenna for QCX Plus 9 messages
Is there an official mod (or even an updated QCX Plus) with the facility for a separate receive antenna? When portable this shouldn't be necessary, but many of these rigs are used in domestic environm
Is there an official mod (or even an updated QCX Plus) with the facility for a separate receive antenna? When portable this shouldn't be necessary, but many of these rigs are used in domestic environm
|
By
ian liston-smith
·
|
|
QDX V3 was working, now no RF out. Need help. 9 messages
#qdx
My QDX V3 arrived 2 days ago. The build went well, and the board seemed to be working fine, but after I put the board into the enclosure, the RF output went away. Here is a detailed account: 1. I am u
My QDX V3 arrived 2 days ago. The build went well, and the board seemed to be working fine, but after I put the board into the enclosure, the RF output went away. Here is a detailed account: 1. I am u
|
By
Dan W6AZI
·
|
|
Anyone know the approx build time on a QCX Mini after ordering? 15 messages
Just curious..... 73 de N1JWW
Just curious..... 73 de N1JWW
|
By
JEFF WALDROP - N1JWW
·
|
|
Enhanced QDX for 2 Meters .. Crazy? 41 messages
#qdx
I've recently become interested in Digital Modes on 2 meters. (Trying to communicate with my son 8 miles away .. HF NVIS has been problematic). I tried to find some cheap SSB 2 meter rigs to test the
I've recently become interested in Digital Modes on 2 meters. (Trying to communicate with my son 8 miles away .. HF NVIS has been problematic). I tried to find some cheap SSB 2 meter rigs to test the
|
By
tom@...
·
|
|
QLG 2 Receiver Kit with LCD module
Hi All, If you go to Dayton or order from Internet the GPS kit is a winner. If Hans brought some snap it up. In 15 min you can make a field clock that is more accurate than a cell phone UTC app which
Hi All, If you go to Dayton or order from Internet the GPS kit is a winner. If Hans brought some snap it up. In 15 min you can make a field clock that is more accurate than a cell phone UTC app which
|
By
George Korper
·
|
|
QDX at Dayton 4 messages
I stopped at the QRP Labs booth in building two today. I purchased a QDX kit. The fella at the Booth pointed to maybe five or six kits, and said that was all there was right now. I was happy to be abl
I stopped at the QRP Labs booth in building two today. I purchased a QDX kit. The fella at the Booth pointed to maybe five or six kits, and said that was all there was right now. I was happy to be abl
|
By
John Myers, KD8MQ
·
|
|
New QCX-Mini on 17 meters 4 messages
My 3rd build, 40m, 20m and now 17m. It went together perfectly. L3 wound with 12 turns instead of 13 turns to achieve 5 watts output at 12volts, 6.25 watts at 13.2 volts might be too high. Thanks for
My 3rd build, 40m, 20m and now 17m. It went together perfectly. L3 wound with 12 turns instead of 13 turns to achieve 5 watts output at 12volts, 6.25 watts at 13.2 volts might be too high. Thanks for
|
By
Bill P.
·
|
|
U4B CW frequency console vs. running program. 4 messages
#u4b
I notice that when I run the CW command in the console that the transmit frequency is incorrect. Freq is about 9.3 MHz instead of 14,097,100 If I put an identical CW command in the TRACKER file and "R
I notice that when I run the CW command in the console that the transmit frequency is incorrect. Freq is about 9.3 MHz instead of 14,097,100 If I put an identical CW command in the TRACKER file and "R
|
By
Alan Kilian
·
|
|
QDX Rig Brag Thread 4 messages
#qdx
Tell us all about your QDX rig, the build, the antenna, tuner, pc, power supply, cabling, software, etc. Did you have any challenges getting it to work? How do you plan to use it? KC8WBK
Tell us all about your QDX rig, the build, the antenna, tuner, pc, power supply, cabling, software, etc. Did you have any challenges getting it to work? How do you plan to use it? KC8WBK
|
By
Paul VandenBosch
·
|
|
QCX mini wire lengths for toroids question 8 messages
I just received shipping information that my QCX mini kit has shipped. I am expecting the kit next week sometime. I was reading the assembly manual. I can not find wire lengths for the toroids. Is the
I just received shipping information that my QCX mini kit has shipped. I am expecting the kit next week sometime. I was reading the assembly manual. I can not find wire lengths for the toroids. Is the
|
By
Glenn Maclean
·
|
|
QDX R3 help please. 3 messages
At powerup led flickers then remains constant,however the led2 on the bottom flashes in unison then goes out. Computer recognizes radio an WSJTX will decode but no waterfall, but I didn't have time to
At powerup led flickers then remains constant,however the led2 on the bottom flashes in unison then goes out. Computer recognizes radio an WSJTX will decode but no waterfall, but I didn't have time to
|
By
Dave Huelsbeck
·
|
|
QDX Undelivered Delivery 14 messages
My QDX is expected any day and I received an email from my "courrier" asking me to give them a charge card for $3.00 for a 2nd delivery (they claim they could not see my house number although it is on
My QDX is expected any day and I received an email from my "courrier" asking me to give them a charge card for $3.00 for a 2nd delivery (they claim they could not see my house number although it is on
|
By
JE Jesson
·
|
|
UB4 GPS not locking 8 messages
I saw a thread a week ago or so about the gps lock on the UB4. I made a 45mm dipole with a 25mm twisted feed line and have the unit outside with a good view of the sky. I am not getting any Sat data a
I saw a thread a week ago or so about the gps lock on the UB4. I made a 45mm dipole with a 25mm twisted feed line and have the unit outside with a good view of the sky. I am not getting any Sat data a
|
By
Colin Kaminski
·
|
|
Mini locked in TX by headphones 3 messages
I've seen this covered in past threads but this instance has to do with a rig that's been working for almost a year. Went to activate a park, and the headphone audio was crackling as soon as I powered
I've seen this covered in past threads but this instance has to do with a rig that's been working for almost a year. Went to activate a park, and the headphone audio was crackling as soon as I powered
|
By
Ted
·
|
|
QDX Problems 3 messages
#qdx
#problem
I finished my QDX V3 but I seem to have two problems. It will receive and transmit on all bands, and I have made quite a few contacts on all bands, but the output on 40 meters is low compared to the o
I finished my QDX V3 but I seem to have two problems. It will receive and transmit on all bands, and I have made quite a few contacts on all bands, but the output on 40 meters is low compared to the o
|
By
Robert Robbins
·
|
|
U4B - Balloon tracker at Dayton? 3 messages
Any chance these would be available for purchase at Dayton this weekend? If not I’ll order online, excited to check them out. Thanx,tom
Any chance these would be available for purchase at Dayton this weekend? If not I’ll order online, excited to check them out. Thanx,tom
|
By
Tom Pankonen
·
|
|
OT topic BUT QRPGuys Digital Power/SWR W/Dummy Load 27 messages
Has anyone daisy chained two QRPGuys Digital Power/SWR w/Dummy Load. My goal is to get both the Power and SWR for my U3S at the same time with out mortgaging the house. This device can do one or the o
Has anyone daisy chained two QRPGuys Digital Power/SWR w/Dummy Load. My goal is to get both the Power and SWR for my U3S at the same time with out mortgaging the house. This device can do one or the o
|
By
Larry Christensen
·
|
|
Curious about order status - this is NOT a complaint, I promise! 7 messages
#qcxmini
Hi gang, I am trying to understand my order status and dates. Again, this is NOT a complaint. :) I ordered a QCX-mini kit and some other add on kits on April 7. Just out of curiosity, I logged in to l
Hi gang, I am trying to understand my order status and dates. Again, this is NOT a complaint. :) I ordered a QCX-mini kit and some other add on kits on April 7. Just out of curiosity, I logged in to l
|
By
chuckhubbert
·
|