|
Speed Knob 6 messages
I saw a speed knob in someone’s post and realized I needed one. I spent way too much time on it. Lol. https://www.thingiverse.com/thing:5452280 -- Colin Kaminski - K6JTH https://www.qsl.net/k6jth/
I saw a speed knob in someone’s post and realized I needed one. I spent way too much time on it. Lol. https://www.thingiverse.com/thing:5452280 -- Colin Kaminski - K6JTH https://www.qsl.net/k6jth/
|
By
Colin Kaminski
·
|
|
QDX audio line out tap 17 messages
Would it be possible to get a analog audio line out taps from the positive sides of C63 and C69 to run to a small audio amp for sound monitoring of the QDX? -- 73, Dan - W2DLC
Would it be possible to get a analog audio line out taps from the positive sides of C63 and C69 to run to a small audio amp for sound monitoring of the QDX? -- 73, Dan - W2DLC
|
By
Daniel Conklin
·
|
|
G8GYW QRP Power SWR Meter 67 messages
What a cute combo! I'm glad I just got new glasses to read the display! The SWR reading is correct. I can't vouch yet for the accuracy of the power reading but it's obviously close. The meter was deve
What a cute combo! I'm glad I just got new glasses to read the display! The SWR reading is correct. I can't vouch yet for the accuracy of the power reading but it's obviously close. The meter was deve
|
By
Mark KB0US
·
|
|
QDX audio monitor? 3 messages
Does anyone know if it is possible to be able to monitor the receive audio? I have tried to use VAC to redirect the audio that the QDX sends to WSJT-X to my computer speakes, but no dice. Has anyone b
Does anyone know if it is possible to be able to monitor the receive audio? I have tried to use VAC to redirect the audio that the QDX sends to WSJT-X to my computer speakes, but no dice. Has anyone b
|
By
W8DU_Arnie
·
|
|
RPi 4 Stock 6 messages
The RPi4 2Mb is in stock at the PiHut this morning. Limit 1 per customer. -- Colin Kaminski - K6JTH https://www.qsl.net/k6jth/
The RPi4 2Mb is in stock at the PiHut this morning. Limit 1 per customer. -- Colin Kaminski - K6JTH https://www.qsl.net/k6jth/
|
By
Colin Kaminski
·
|
|
QDX sweeps looking strange 7 messages
Hi! My QDX arrived yesterday. I already assembled it and updated firmware to 1_04. It seems to be working with the dummy load (I haven't tested it with the antenna yet; I'll probably be able to do it
Hi! My QDX arrived yesterday. I already assembled it and updated firmware to 1_04. It seems to be working with the dummy load (I haven't tested it with the antenna yet; I'll probably be able to do it
|
By
Adam
·
|
|
Suggestion to speed-up QDX serial port development
Hi all, for those who are as eager as me to get an extra serial monitoring port for the QDX in a future firmware release, here is all my humble technological knowledge allows me to contribute to this
Hi all, for those who are as eager as me to get an extra serial monitoring port for the QDX in a future firmware release, here is all my humble technological knowledge allows me to contribute to this
|
By
Stefan U. Hegner
·
|
|
U4B Update Problem 3 messages
My U4B came with version 001 of the firmware so I decided to update it to the latest version, 003. The procedure seemed straightforward but I appear to have made a serious error somewhere. I followed
My U4B came with version 001 of the firmware so I decided to update it to the latest version, 003. The procedure seemed straightforward but I appear to have made a serious error somewhere. I followed
|
By
John Laidler
·
|
|
problems with RX-bandselector IC3 8 messages
#qdx
QDX rev 3 bought in Friedrichshafen (hamradio) at the end of june. Built up after manual instructions I observed and measured problems with band selector IC3 -- not so important here: the RFscan self
QDX rev 3 bought in Friedrichshafen (hamradio) at the end of june. Built up after manual instructions I observed and measured problems with band selector IC3 -- not so important here: the RFscan self
|
By
hartje
·
|
|
headless FruitPi for QDX 13 messages
#wspr
#qdx
let me ask here as well as I asked on wsprnet.org do you know of a program (as source) which produces the audio (wav format) with tones for a wspr transmission. I know of the "wsprsim" which produces
let me ask here as well as I asked on wsprnet.org do you know of a program (as source) which produces the audio (wav format) with tones for a wspr transmission. I know of the "wsprsim" which produces
|
By
hartje
·
|
|
QDX 20m RF Sweep v1_04 Default Operating Frequency Vertical Line Missing 12 messages
Hello all, I noticed that the default operating frequency vertical line is missing from the 20m RF Frequency Sweep and been meaning to ask about it. Here's the RF Sweep from Adam's recent post as an e
Hello all, I noticed that the default operating frequency vertical line is missing from the 20m RF Frequency Sweep and been meaning to ask about it. Here's the RF Sweep from Adam's recent post as an e
|
By
Al Holt
·
|
|
QDX PC Board Revision 6 messages
There's no revision number on my QDX pc board, but I bought it in January 2022. Is it version 1 or version 2? Thanks, Jim AC1ML _._,_._,_
There's no revision number on my QDX pc board, but I bought it in January 2022. Is it version 1 or version 2? Thanks, Jim AC1ML _._,_._,_
|
By
Jim Linder, AJ6ER
·
|
|
Hakko 20% off sale, August 9th 2 messages
For those who are fans of Hakko products, or want to check them out for the first time, Hakko is having a one day 20% off anniversary sale on August 9th, 2022. Use coupon code HAKKO20, at www.hakkousa
For those who are fans of Hakko products, or want to check them out for the first time, Hakko is having a one day 20% off anniversary sale on August 9th, 2022. Use coupon code HAKKO20, at www.hakkousa
|
By
Don--AE4DW
·
|
|
#50w 6 messages
#50w
Rookie kit builder working on building the 50W amp (rev 2). I'm trying to figure out if I screwed up or I'm seeing something "normal" once I put a transformer in the circuit. I wound and installed bif
Rookie kit builder working on building the 50W amp (rev 2). I'm trying to figure out if I screwed up or I'm seeing something "normal" once I put a transformer in the circuit. I wound and installed bif
|
By
tim born
·
|
|
QCX-mini Options 6 messages
My desire is to have both the battery displayed and working and be able to see the RF (even though it’s not highly accurate) without opening the case more than once. Can an external switch be installe
My desire is to have both the battery displayed and working and be able to see the RF (even though it’s not highly accurate) without opening the case more than once. Can an external switch be installe
|
By
KK4ITX John
·
|
|
Should I lower QCX power when using to send WSPR? If yes, how? 21 messages
I am going to use the WSPR capability in my QCX mini. Seems to me I would get a more accurate report if I lowered my power. And, I am concerned that 2 minutes of key-down is kinda hard on the final am
I am going to use the WSPR capability in my QCX mini. Seems to me I would get a more accurate report if I lowered my power. And, I am concerned that 2 minutes of key-down is kinda hard on the final am
|
By
Ed Mohrman WA7EM
·
|
|
QDX Sound Card config in Windows 10 2 messages
#qdx
I was having some issues listening to Pandora while simultaneously operating the QDX. On my Win10 PC, I have 3 sound cards: internal sound card connected to external speakers a bluetooth dongle sound
I was having some issues listening to Pandora while simultaneously operating the QDX. On my Win10 PC, I have 3 sound cards: internal sound card connected to external speakers a bluetooth dongle sound
|
By
Mont Pierce KM6WT
·
|
|
QDX ship dates 3 messages
Hi Hans Looking at getting a QDX + Case for son in law xmas present, I know plenty of time You qdx pre-order page still says shipping in july? Its august 😊 If pre-ordered now I assume late aug / sept
Hi Hans Looking at getting a QDX + Case for son in law xmas present, I know plenty of time You qdx pre-order page still says shipping in july? Its august 😊 If pre-ordered now I assume late aug / sept
|
By
M0PWX
·
|
|
Low Output on QDX 3 messages
I am only getting 1.5 W output on all bands. I am thinking I may have toasted two of the BS170s. I plan to replace all of them. After noticing the ouotput problem, upon examination, I discovered that
I am only getting 1.5 W output on all bands. I am thinking I may have toasted two of the BS170s. I plan to replace all of them. After noticing the ouotput problem, upon examination, I discovered that
|
By
KS4YX Gil
·
|
|
QCX Mini Stand 5 messages
#qcxmini
All: My QCX Mini (TCXO / AGC) arrived the other day and I have to say that the RX performance is better than I expected. I can see how a stand of some kind would come in handy and I was wondering if a
All: My QCX Mini (TCXO / AGC) arrived the other day and I have to say that the RX performance is better than I expected. I can see how a stand of some kind would come in handy and I was wondering if a
|
By
Tony
·
|