Hans, I'm guessing your team has been building and shipping quite a few factory built QDX-HBs. I was wondering if you all are encountering many suffering from low power output? Earlier your investigat

I have two QSX-minis 40m and 20m for sale. 20m version works fine! 40m - weird issues! Both have been in storage since Covid - both are factory built and neither has ever had a QSO!! (originally for P

What do you think ? Back home in the NRV of VA now at N4QA no slash 4. Both call signs, both signal reports, both grids .Wish I had logged this one before clearing it by switching to the FT-450 config

In another thread (Raspberry Pi + QDX + JS8Call), one post (by Mario Vano AE0GL) made reference to using a tablet with VNC to connect to an RPi via the Pi's built in RNDIS Gadget support over USB. Whe

Am 29.03.2023 um 12:21 schrieb Per - LA9XKA: > Thomas, > > For QCX: > https://groups.io/g/QRPLabs/files/Firmware%20for%20QCX%20kit > > and for QDX: > https://qrp-labs.com/qdx.html > > 73 de LA9XKA - P

Hi folks, after quite a while I decided to give my QCX an QDX devices a firmware fresh-up. On QRP Labs it reads: "The firmware version files are hosted by the QRP Labs groups.io forum." ..but unfortun

Just finished build the 20m amplifier. DC Connected - 16V. The green led lights up fully. but the red led also lights up but more faint. Applied 5V to T/R switch and red led lights up fully. No RF app

Dear all, See the attached picture of my HF QDX for the 20 meter band. Every band from 10 to 17 meters are perfectly in specification. It is only the 20 meter band that is out significantly. The QDX w

When I go to the order pages they say they are available but my order for the beginning for March has not shipped. It said they would be delayed when I ordered, but now they do not show a delay. Just

Hi, I have just finished building a QCX Mini for 40 Meters, and everything aligned exactly as per the manual, fabulous! Its connected to a laboratory grade power supply, and the output is hooked it up

Hello Bought, built and used Mini for 20 M - fantastic radio. But monobander. Number 2 Mini for 10 M is on the way. Yes, I understand lower sensitivity and p/o, but want to capture solar cycle. So, qu

My QDX showed up earlier today, and I'm trying to get CAT working on WSJT-X. Unfortunately, I'm having no luck following the 1_08 firmware operating manual. Here are the settings and error message. An

Wondering if there is a shipping issue or parts supply problem on QCX+ kits? I ordered a 17 meter kit (order number 69743) back on 10-March and have heard nothing yet. Previous kit orders were sent pr

Back in July 2022 Hans introduced new firmware that fairly well rectified RF "popping", caused by a discontinuity in the Si5351 output, just occasional "pops" noticed. This affected all boards up to a

Hello, I have two minis, one for 20m and one for 40m. I can get WSPR to work fine on my 40m but have rarely gotten a hit on wsprnet with my 20m. I have had plenty of qsos with this radio. The major di

Hello, I have two minis, one for 20m and one for 40m. I can get WSPR to work fine on my 40m but have rarely gotten a hit on wsprnet with my 20m. I have had plenty of qsos with this radio. The major di

ProgRock2 problem, unable to change register values 1) What I have: a) ProgRock2 ver 1_01 (13-Mar2023), CLK0 = 10 MHz. b) Dell laptop, Win7, running Hyperterm c) PC, Win10, running TeraTerm d) Trimble

The U4B is working great in WSPR mode but I need to get the entire lat and long data for ~5M accuracy, not just the maidenhead location, on the wspernet web site (or locally). Can this be done via the

I live in 30606. What are you asking? I await your reply. HIF

Hi Did anybody installed RPi and/or PA and/or GPS and/or extra LPFs and/or ATU inside an QCX+ ? How? Any ideas 73 muhsin TA1MHS