Am 29.03.2023 um 12:21 schrieb Per - LA9XKA: > Thomas, > > For QCX: > https://groups.io/g/QRPLabs/files/Firmware%20for%20QCX%20kit > > and for QDX: > https://qrp-labs.com/qdx.html > > 73 de LA9XKA - P

Hi folks, after quite a while I decided to give my QCX an QDX devices a firmware fresh-up. On QRP Labs it reads: "The firmware version files are hosted by the QRP Labs groups.io forum." ..but unfortun

Hello Bought, built and used Mini for 20 M - fantastic radio. But monobander. Number 2 Mini for 10 M is on the way. Yes, I understand lower sensitivity and p/o, but want to capture solar cycle. So, qu

Wondering if there is a shipping issue or parts supply problem on QCX+ kits? I ordered a 17 meter kit (order number 69743) back on 10-March and have heard nothing yet. Previous kit orders were sent pr

Back in July 2022 Hans introduced new firmware that fairly well rectified RF "popping", caused by a discontinuity in the Si5351 output, just occasional "pops" noticed. This affected all boards up to a

Hello, I have two minis, one for 20m and one for 40m. I can get WSPR to work fine on my 40m but have rarely gotten a hit on wsprnet with my 20m. I have had plenty of qsos with this radio. The major di

Hello, I have two minis, one for 20m and one for 40m. I can get WSPR to work fine on my 40m but have rarely gotten a hit on wsprnet with my 20m. I have had plenty of qsos with this radio. The major di

ProgRock2 problem, unable to change register values 1) What I have: a) ProgRock2 ver 1_01 (13-Mar2023), CLK0 = 10 MHz. b) Dell laptop, Win7, running Hyperterm c) PC, Win10, running TeraTerm d) Trimble

The U4B is working great in WSPR mode but I need to get the entire lat and long data for ~5M accuracy, not just the maidenhead location, on the wspernet web site (or locally). Can this be done via the

I live in 30606. What are you asking? I await your reply. HIF

Hi Did anybody installed RPi and/or PA and/or GPS and/or extra LPFs and/or ATU inside an QCX+ ? How? Any ideas 73 muhsin TA1MHS

Hi all, Don't forget: next Monday March 27th will be the next QCX Challenge. see all info on https://www.qrp-labs.com/party.html For our European friends, don't forget we will have changed to summer t

I did a POTA activation with the QDX high band yesterday. I had 23 contacts on 20,17, and 10m. Only one QSO on 10m, probably because my QDX only puts out 2w on 10m. Regardless, great fun with the QDX

QDX low bands REV3. Still had the original firmware 1.05. update via USB disk procedure. I wanted to backup the 2 original files before moving to 1.09 My Windows 10 pc tells me the file 1.05 is not fo

Love(d) this kit, while it was working ;-) Still love it, but I'd love it more if it wasn't hard stuck in bootloader mode. Got the kit last week, put it together slowly over a few days. Completed Tues

Is there a way to transmit the current longitude and latitude through the u4b. I can transmit maidenhead location through the board but am unable to figure out a way for a more specific location.

Hi All QDX Rev 3 no RF out on 80M Built For 9V Have been getting 4.5W out at 9V on 20M. Don't use 80M so no high priority to resolve. Normally do antenna tuning at 5.5V (on 20M) with no problems using

Hi all well I had my QDX up and running with WSPR on 20M-10M for just over a week and then on Sunday night with no warning whatsoever a dry lightning strike happened about 600M away (if there was any

Hi, I have a QDX that I purchased back in September last year (pre-built) and it has worked well up to now. It is a 12v version. It now doesn't seem to receive any signals at all (FT8 on 20m as an exa

WB6RER-2 32" Yokohama U4B on 10m was launched at 15:36z this morning from Golden Valley AZ. Was a great zero wind morning and we had pretty much a vertical launch. We are seeing it's location by grid