Topics

Shipping FAQ

Tisha Hayes
 

Hans,
The most recent order I placed with you for a few additional filters and a filter relay board arrived amazingly fast. 

I am going to convert one of the filter boards and populate it with 2.54mm machined header pin sockets; I want to experiment with low pass filter design at 160 and 620m and try out different ferrite mixes, winding techniques and Litz wire. If it is all socketed I can change components without soldering. Then I can put the filter board on a test jig and attach it to either the VNA or a sweep generator feeding a 40 dB power amplifier to look at insertion losses.
--
Tisha Hayes, AA4HA
Sr Engineer, 4RF Inc.

KI7MWA
 

I placed my order for a U3S, with case, on 10/5.  I had to wait for my kit to ship, until June 2, while Hans waited to receive his shipment of Si5351 boards.  Then until yesterday while TNT and Fedex figured out how to get it all to me.

The case from China, on the other hand, went out on May 12 (seven days after placing the order), and arrived a mere 10 days later, with no special shipping.

I suppose we should be thankful that we have lived (note past perfect tense) through a time when we could demand "next day delivery," and expect to get it.

N3MNT
 

Same here.  Left China May 1st.  Still cruising the ocean somewhere.

Richard Perry
 

You're not alone in that- I'm currently about the same (ordered 04 May). Mine is "en route" but hasn't moved since the 15th of May. Not Hans's fault in any way, and given the state of the world right now, maybe not even the Chinese postal system's fault, but still - frustrating.

Richard Perry, AJ0V

Hans Summers
 

You missed out the first part of the journey! Gaziemir is in Izmir, Turkey's third largest city. To get there it has to travel first from Dalyan to Marmaris by road, then Marmaris to Izmir. 300km by road! 

Glad to hear it arrived OK though a bit on the slow side. Some people are lucky and get it in only a few days!

Trish I hope your enclosure gets to you soon. There do seem a few delays on stuff coming out of China

73 Hans G0UPL 


On Wed, Jun 17, 2020, 01:46 KI7MWA via groups.io <entilleser=yahoo.com@groups.io> wrote:
And so, the saga ends.  A story of international shipping in the Year of our Lord, Covid-19: Gaziemir to Pendik to Grace-Hollogne to Santiago to Campinas to Jamaica to Houston to Western Washington, in 11 days.  Whew!

Tisha Hayes
 

Hans does a great job of shipping kits out of Turkey, I have had three and a half orders delivered so far. What is still in the ordering black-hole is the Ultimate 3/3S case that ships out of China.

My original order was;

Order ID: #35222
Date Added: 02/05/2020

I am coming up on six weeks, waiting for the box. That seems to be the delay; when its outside of Hans's control.
--
Tisha Hayes, AA4HA
Sr Engineer, 4RF Inc.

 

So, Gordon... your soldering iron must be nice and hot by now, then (hi)

Enjoy your build !

Julian N4JO

On 6/16/2020 5:46 PM, KI7MWA via groups.io wrote:
And so, the saga ends.  A story of international shipping in the Year of our Lord, Covid-19: Gaziemir to Pendik to Grace-Hollogne to Santiago to Campinas to Jamaica to Houston to Western Washington, in 11 days.  Whew!

KI7MWA
 

And so, the saga ends.  A story of international shipping in the Year of our Lord, Covid-19: Gaziemir to Pendik to Grace-Hollogne to Santiago to Campinas to Jamaica to Houston to Western Washington, in 11 days.  Whew!

KI7MWA
 

Houston!

KI7MWA
 

Woo hoo!  Cleared customs (apparently...and in the US, I presume), though its current location is "Tba"...

KI7MWA
 

Jamaica!

Dave 'TXJ
 

Most recent surface mail order arrived yesterday, the order placed before that is still "somewhere". However an order selected to come via TNT was here in 24 hours, amazing!

73 Dave

KI7MWA
 

...and...now...Brazil!  Talk about International shipping!

KI7MWA
 

Today my shipment made it from Belgium to Chile!  

KI7MWA
 

Ahhh...another day in "Pending Delivery" purgatory...

Mike Besemer - WM4B
 

I’m chill.  Back to work now anyway!

 

Mike

WM4B

 

From: QRPLabs@groups.io [mailto:QRPLabs@groups.io] On Behalf Of RACHAEL SANDERS
Sent: Tuesday, June 9, 2020 4:55 PM
To: QRPLabs@groups.io
Subject: Re: [QRPLabs] Shipping FAQ

 

Chiiiiill Mike!



On 9 Jun 2020, at 18:43, Mike Besemer - WM4B <mwbesemer@...> wrote:



Looks like one of mine broke loose. The oldest one is still lost in space.

 

Mike

WM4B

On Jun 9, 2020 9:55 AM, "KI7MWA via groups.io" <entilleser@...> wrote:

Well, perhaps it is my karma... TNT Tracking now says: "Scheduled delivery pending"...whatever that means...

RACHAEL SANDERS
 

Chiiiiill Mike!


On 9 Jun 2020, at 18:43, Mike Besemer - WM4B <mwbesemer@...> wrote:


Looks like one of mine broke loose. The oldest one is still lost in space.

Mike
WM4B
On Jun 9, 2020 9:55 AM, "KI7MWA via groups.io" <entilleser@...> wrote:
Well, perhaps it is my karma... TNT Tracking now says: "Scheduled delivery pending"...whatever that means...

Mike Besemer - WM4B
 

Looks like one of mine broke loose. The oldest one is still lost in space.

Mike
WM4B

On Jun 9, 2020 9:55 AM, "KI7MWA via groups.io" <entilleser@...> wrote:
Well, perhaps it is my karma... TNT Tracking now says: "Scheduled delivery pending"...whatever that means...

RACHAEL SANDERS
 

Mine did exactly that then shortly after was at the local depot then was pronounced ‘Out for delivery’
Have patience guys! As my then 3 year old used to say ‘Patience is a virtue, Mummy’
73
Rachael 

On Tue, 9 Jun 2020 at 15:56, N3MNT <bob@...> wrote:
Same here.  Originally showed the 3rd, which changed to the 8th and then to Scheduled Delivery Pending. .  Just confirming the same thing out of Hans' control.

N3MNT
 

Same here.  Originally showed the 3rd, which changed to the 8th and then to Scheduled Delivery Pending. .  Just confirming the same thing out of Hans' control.