Topics

Band Cycling #chat


Andrew Lenton
 

I would like my U3S to cycle through

 

1.     30,10,12,15,17,20  (relays are 0, to 5 in  0=30m, 1=10m, 2=12m, 3=15m, 4=17m, 5=20m, as 10m (highest frequency), must be in position 1. if I read this correctly.)

2.    1 Wait enough time to Cal.

3.    2 Then start over!

4.    3 Can the US3 do this?

5.    4 If so, What do I have to set and where, for this to happen?

 

73

 

Andrew


SM7ETW Jan
 

Sure it can do it!

1. Set Txs to 5 (0-5=6) it is on the screen with 5 parameters on the same screen.
2. Program the 6 positions now available with frequency and what filter to use.
3. Frames 14 3 (the second figure can be even numbers 0-12).

And of course your call , and how many dBm you should indicate to other stations.

Jan


Andrew Lenton
 

A big Thank you!!!

 

Ah! Txs is on page 8 and 10, and I am trying to follow the settings on page 4,5 +6!!! That parameter needs to be mentioned on page 5.

 

 

 

T3

 

Andrew

 

From: QRPLabs@groups.io [mailto:QRPLabs@groups.io] On Behalf Of SM7ETW Jan
Sent: 04 September 2017 11:08
To: QRPLabs@groups.io
Subject: Re: [QRPLabs] Band Cycling #chat

 

Sure it can do it!

1. Set Txs to 5 (0-5=6) it is on the screen with 5 parameters on the same screen.
2. Program the 6 positions now available with frequency and what filter to use.
3. Frames 14 3 (the second figure can be even numbers 0-12).

And of course your call , and how many dBm you should indicate to other stations.

Jan


This email has been scanned by BullGuard antivirus protection.
For more info visit www.bullguard.com