so do I make the check out to QRPLabs or Labs... hi hi 72, Brian K9WIS -----------------------------------------From: "Hans Summers" To: qrplabs@groups.io Cc: Sent: Thursday December 12 2019 4:59:49AM

You can install Unbutnu linux on your windows 7 machine and then choose which OS you want to run at startup...the nice part about Unbuntu running side by side with windows is that you can access the f

I ran across this link when I was researching out upcoming balloon project https://medium.com/loonar-technologies/faa-101-how-to-legally-get-your-high-altitude-balloon-to-near-space-742a0acf0c45 Brian

I fly high power rockets as my warm sunny day hobby. We only have to notify the nearest airport for a waiver that allows us to fly to 10,000 feet if our rocket weighs 3.3 pounds or more.. So Im guessi

Hi Mark, If your really decide not to build your own and If no one steps up..I'll build one for you..I used to volunteer to build kits for elecraft when they offered the K1. I've found that it general

Andy, Your suggestion for changing the access to Dialout worked and I can now control the rig and monitor signals, I am using an standalone usb soundcard ( the same one that worked before the Windows

One is real but old and the windows message said no longer supported, one maybe fake (an ebay special) as windows the windows message said that it wasnt authentic, but I had drivers the worked with it

I can see ttyUSB0 and ttyUSB1 in the WSJT radio config panel.and they do go away when I unplug the cables. These are older prolific usb to serial cables..I use one for cat control and the other for PT

I have a TS-870S....I used all the same settings that I used when I could run the windows version. So I'm not sure if there are additional drivers I need to install for the Linux version. When I open

amen! Recently Microsoft did a huge windows10 update without warning or permission that rendered my station useless as they decided not to support the drivers for several USB to RS232 cables I use by

Jim. What are you using for an antenna for the HF wspr beacon? Are you using an LightAPRS beacon? Brian K9WIS -----------------------------------------From: "James Zelazny jr" To: QRPLabs@groups.io Cc

what version of firmware is in the clocks you shipped just a few days ago? Brian K9WIS -----------------------------------------From: "Hans Summers" To: QRPLabs@groups.io Cc: Sent: Sunday September 15

Brian, Is there any concern about that HF antenna getting caught up in power lines and causing a flashover.. Its one of the worries I have about using WSPR and HF on my balloons.. Brian K9WIS --------

I see from the specs that the clock can work with a 2 line or 4 line display... If I have only a 2 line display can I scroll and display line 2 and 3 or line 3 and 4 or line 4 and 1? Just curious..whe

Dean, I ran your data through a sidereal time calculator and came up with: The longitude is set to -0.334deg, [W 0deg -20' -2"] Enter the UTC time and date as MMDDYY HHMM. (UTC = EST+5, EDT+4): 090919

FYI. 1 Degree in Long = 4 minutes of time...I live at 90 Degree West of 0 degrees Long (Greenwich Meridian). So if it is Midnight (24:00) GMT. My local time is 24:00-(90 *4 minutes) or 24:00 - 360 min

I work at the Horwitz DeRemer Planetarium, You clock is a major upgrade from the arduino one I codded up and built many years ago that does not include the GPS. I plan to purchase a kit next week and

Thanks for the info Alex.... Brian K9WIS -----------------------------------------From: "Alex N7AGF" To: QRPLabs@groups.io Cc: Sent: Monday September 2 2019 7:32:34PM Subject: Re: [QRPLabs] LightAPRS

Thanks for the affirmation Joe...You can count on getting questions from me as we proceed... I would love to hear about some of of your experiences lauching and tracking balloons. Brian K9WIS --------

Here is what I found about FAA and pico HAB balloons..You are right, being just a few ounces and a balloon with greater than 36 square inchs makes us exempt...That makes this a lot easier. Here is the