Low power version commercial version I have been using for a few years for FD- MFJ-1982LP, END FED, 1/2 WAVE, 80-10M, 30W WIRE ANTENNA $79.95 -- Anthony Luscre K8ZT Ohio Section Section Youth

On Fri, May 6, 2022 at 08:48 PM, Jim Strohm wrote: The ARRL just announced an EFHW antenna that they are marketingOh gawd. Next it will be the RSGB selling G5RV's next to any fool with £200 to spare.

Hi Tony If you aren't intending to use the telemetry it would really be best to modify the program... Instead of using the TELE command use WSPR (see manual for how to specify the parameters).

7: End feed is more convenient for the location of the feed line for many hams whose shack is located in the corner or end of their property (as opposed to the middle).

How about a future hw option for the QDX that would provide for a direct connection to the antenna with no BPF which would be for receive only so an external BPF could be used for

I read the manuals a week or two back when I ordered it and I understand that it comes up in 9mw mode unless you change the parameter. Since I don't understand how to do that, and am reluctant to

I’d hardly call the popularity of EFHW antennas “cult like following”. There are many reasons for the EFHW’s popularity: 1. Materials are commonly available 2. The antenna is inexpensive to

Hi Tony Great stuff... I'm curious as to whether you are using low power (9mW) or high power (27mW) transmission mode? 73 Hans G0UPL http://qrp-labs.com https://www.buymeacoffee.com/g0upl

Hello Liam Muhsin TA1MHS also reported the same thing. He later found that outdoors with a good 360° sky view Hardware test doss actually work. So it appears that it needs much higher satellite

Hi all, I've been playing around with the U4B and configuring it for launch, running tests, calibrating it, etc. but the Hardware test menu seems to not be working. I can navigate over to the menu but

Glad you made it home safely 🙏 Glory to God

Can't please 'em all, can ya?! Thanks, Pat... I'm just trying to stay in communication, and not leave good patient folk hanging out to dry with no news. I know people are excited about QRP Labs kits,

Thanks for the advice Hans (and the super little item). I just swapped it onto 20 meters from 30 and picked up more spots. I am MORE than happy with that for one transmission with a random wire and

Hello Paul QDX can receive SSB and CW just fine. However the audio passband is fixed at 150Hz to 3.2kHz which may be wide for SSB and certainly is for CW. I did not write code in the SDR for AM or

Thanks Pat But not necessary. Mick's order was one of the over-orders in batch #2. Hence it will, where possible, be sent as early as possible in the current batch #3 shipping. And nothing is held

Hi Tony I'm happy to hear that it is working fine! The reason all the U4Bs have "KM46" in them when they arrive from me is that they are all tested here before shipping. We connect an ST Link 2

Jim, Three letters - HOA :-) I can easily and discreetly put the box with the impedance-matching coil on the side of my house and, for QRP levels, loosely run insulated wire through the trees in my

You are the man, Julian I don't care what anyone else has been saying bad about you.

Does the QDX work as a receiver for SSB, CW and broadcast bands? If so, which software would one use?

My QDX order is: #56724. You can ship my QDX to Mick and ship mine out of batch 4 or 5.