Thanks for letting us know!

Thanks Jack. Alan On 29/06/2019 21:45, jjpurdum via Groups.Io wrote:

No, the JackAl group is fine, only HamRadioDesigns.com has been hacked. As far as I know, all of the groups are okay. Jack, W8TEE

Jack, Just to confirm, seen your previous advice for HamRadioDesigns.com?? site, https://groups.io/g/QRPLabs/message/34516 but you say the JackAL IO groups is out of

Very true, but stay away from the JackAl group, as it has been hacked. We will be starting over for that site when we get the rest of the fires under control! Jack, W8TEE

Jack: thanks to you and Alan. io io its off I go. Fred WD9HNU On 6/29/2019 3:05 PM, jjpurdum via Groups.Io wrote:

Alan: Thank You! Fred WD9HNU On 6/29/2019 3:14 PM, Alan de G1FXB via Groups.Io wrote:

Jack has a couple of IO Groups https://groups.io/g/SoftwareControlledHamRadio/messages and https://groups.io/g/JackAl/messages both have traffic for Morse Code

If you check the Files section of SoftwareControlledHamRadio groups.io Group SoftwareControlledHamRadio groups.io Group This group is for anyone who is interested in using software in ham radio

Jack: Never got close enough to thank you for your presentation at FDIM. Your presentation "moved me off dead center", albeit a month later. Having just celebrated my 75th birthday, I have

O.1 watts = SQRT(0.1 * 50) = 2.23 volts Avg. 2.23 * 1.4 = 3.22 volts Peak. That should light almost any modern LED, since modern ones need less than 2V at 3 to 6 ma for adequate brilliance. There

Hi, I have a PFR-3 with an SWR indicator that uses an LED and a 50 ohm resistor in a bridge. The adjustable antenna matcher is separate (althought it is built-in too). The SWR indicator can be

Hi Roger Nothing to do with Friedrichshafen. I took 50 QCX kits and lots of other stuff to Friedrichshafen and sold them all. Yours is ordinary shipment from Turkey. 73 Hans G0UPL http://qrp-labs.com

It was order from and delivered to the UK, and sent from Turkey. I suspect it was from the stock that Hans had planned to take to Friedrichshafen. Either way, terrific service.

Jeffrey, Jim, And possibly IC3 if it does not pass the test with Q1, 2, 3 removed. Seems to indicate it will not AND makes IC1 seem another possible failure. See what readings you get with the

This is a copy with no credit given of Roy Lewallen's design. It is nicely done with good meter scale box etc but Roy should be given credit for the design. Roger K7RXV

Here's my personal favorite. Not cheap, but it has served me well. http://www.ohr.com/wattmeter.htm Mike N0QBH

Monday was originally decided by consensus and its also the only day I can do (a minor point in the great scheme of things). It has also been in the FISTS, SKCC and CWops news letters and its on the

Hi, Jeffrey If you have 9 volts on IC3 pin 3 at all times, that voltage has to come from the +12 in some way. The logical place would be by way of a punctured gate on Q1, 2, or 3,

Fabien, my order was delivered today. So it took 12 days from Turkey to Germany (2019-06-18 till 2019-06-29). Hope you will receive your order soon :-) 73s, Stefan