Re: QDX with Elecraft T1


Roelof Bakker
 

Hello Wolfgang,

These calculations are not correct as the source impedance (your transmitter antenna port) is
not 50 ohm. It must be connected to a 50 ohm load, yet is not 50 ohm itself.

If this should be the case, half of the transmitter output power must be dissipated in this
impedance, which is not the case.

The best way to establish the losses between transmitter output and input / output of the
tuner is to measure them.

73,
Roelof, pa0rdt

Join QRPLabs@groups.io to automatically receive all group messages.