Re: Up-to-date QCX+ tips as of July 25, 2020 #qcx+ #case #manual #enclosure


Michael - wb6csh
 

I did NOT drill out any of the M3 nylon nuts to mount the LCD to the PCB. I'm running into a problem on the potentiometer (R1) side of the PCB; The M3 nut cannot rotate since it is forced up against the rear of R1, when it should be free to tighten up and hold the PCB and the LCD together. Any solutions from anybody?

Join QRPLabs@groups.io to automatically receive all group messages.