Re: Pin Confusion #u3s


KI7MWA
 

KM6WT:

Okay, thanks.  The purpose of the +5V-Heat pin jumper is to provide for the greater current flow needed by the TXCO oven.

And, by the same token, if one is not using the TXCO, and one is using a 5V power supply, one could connect one's power supply to the +5V and Gnd pins, so long as one has the jumper installed for the connection between the +5V and PA pins.  Right?

Join QRPLabs@groups.io to automatically receive all group messages.