QCX+ RF Power #qcx

David G4DMG

My 20m QCX+ is working quite happily albeit only on receive so far.
I have been measuring the output with a scope across the QRP Labs Dummy load and with a 12 V supply I am seeing 23.2V peak-to-peak, which I calculate at 1.3W.
At 16V supply this rises to 31.2V or 2.4W.  I don't know if it is relevant but the supply current  goes from 450mA at 12V to 580mA at 16V.

This is somewhat lower than expected, any suggestions gratefully received.


Join QRPLabs@groups.io to automatically receive all group messages.