Re: #firmware #qcx40 #firmware #qcx40


Wes AE6ZM
 

The only concern would be that your problem is caused by a damaged uP and that was caused by a problem on the board. If so, then the second uP may well receive damage too. Check voltage with original uP in place to make sure Vcc is only 5v.
--
> I finally got it all together...now I can't remember where I put it<

VY 73,
Wes

AE6ZM

Sierra Vista, AZ

 

Join QRPLabs@groups.io to automatically receive all group messages.