Re: OOPS ! 50 Watt Amp

Hans Summers

Hi Paul

This transistor is very non-critical here. 

The only important parameters of the transistor in this application is that it needs to be a P-channel type, and have a Drain Source breakdown rating of at least 160V. Many MOSFETs have 60V or 100V ratings and this is not enough. The current handling capability and power dissipation capability are of no consequence. It only passes microamps and dissipates microwatts. 

I chose this device just because it met the criteria (P type, high voltage) and was easily available and cheap. The large package and power handling are not a requirement. Only the P type and high voltage. 

73 Hans G0UPL 

On Sun, Jul 5, 2020, 20:26 K2DB Paul Mackanos <paul.mackanos@...> wrote:
Found  FQPF2N60C, TO220, MOSFET at DigiKey, $1.16 each + $4.99 shipping, ordered a few extras.
Paul K2DB

On Sun, Jul 5, 2020 at 1:12 PM K2DB Paul Mackanos via <> wrote:

Update on OOPS ! 50 Watt Amp

Here is a high def picture with a computer microscope showing a burn mark directly above  Q3 FQPF2N60C, TO220, MOSFET.
I hope I can find one, and pray that's all that went poof !
Paul K2DB

Join to automatically receive all group messages.