Re: U3s misbehaving...


Alan G4ZFQ
 

The TX Frequent is 200 HZ wide 14.097000 - 14.097200 centre is 14.097100 MHz the confusion is:
Andrew,

Due to the fact that WSPR was first used with a SSB RXTX set to USB the Dial Frequency of that RXTX is quoted.
WSPR then uses 1400-1600Hz modulation frequencies.
The resulting RF is therefore 1400-1600Hz above the SSB "Dial Frequency". (Dial frequency = zeroHz modulation, USB modulation is above that frequency.)
The actual filter characteristics used is not really relevant as long as it lets these signals through.
SSB of course does not feature with stand-alone transmit gear like the U3. That's where the confusion starts.

73 Alan G4ZFQ
* Band Dial freq (MHz) Tx freq (MHz)
* 160m 1.836600 1.838000 - 1.838200
* 80m 3.592600 3.594000 - 3.594200
* 60m 5.287200 5.288600 - 5.288800
* 40m 7.038600 7.040000 - 7.040200
* 30m 10.138700 10.140100 - 10.140300
* 20m 14.095600 *14.097000 - 14.097200*
* 17m 18.104600 18.106000 - 18.106200
* 15m 21.094600 21.096000 - 21.096200
* 12m 24.924600 24.926000 - 24.926200
* 10m 28.124600 28.126000 - 28.126200
* 6m 50.293000 50.294400 - 50.294600
* 2m 144.488500 144.489900 - 144.490100

Join QRPLabs@groups.io to automatically receive all group messages.