Re: PA.


ok, thank you very much for your help, i will let you know. again Lucien, 73 July 8 from Calabria

Il gio 11 giu 2020, 11:20 LUCIEN WILDER via <> ha scritto:
I built the PA as shown in the drawing and it works OK. The flow of RF is from the main board to the PA with wire/cable, then back to the relay board via the existing header/pins, then out via the RF connector on the relay board to the antenna. The PA uses 12V only as it already has a 5V regulator. C5 on the main board needs to come out.

Join to automatically receive all group messages.