installing LCD display #chat


Installing the LCD connectors into a transceiver PCB can be a little tricky. Here's a method to do it right with no problems.
1   put the male and female pin connectors together after removing the test pins
2   solder the assembly onto the  PCB
3   install 2 plastic standoffs next to the pin connectors
4   put the LCD on the connector
5   holding the LCD tight to the standoffs solder it
6   remove the standoffs and store them for later use 

the LCD display will fit exactly with no problems and you don't have to worry about getting the gap right when installing the connectors

Join to automatically receive all group messages.