Re: QSX radio feature requests

Alan de G1FXB

Actually both Bill & Glenn's work feature in atleast one other place:-,,,20,1,0,0


On 25/08/2018 12:39, Alan de G1FXB via Groups.Io wrote:
Good afternoon Gilles,

Glenn is quite prolific with projects. Details here:-

to highlight just one of his builds.....

original concept was by


On 25/08/2018 11:54, F1BFU - Fr - 79 wrote:
Hello Glenn

Very good. Have you PCB or Where can I get the PCB and the schema?
Do you have documentation for the realization of the reels?

73 QRO Gilles F1BFU/FR

Le sam. 25 août 2018 à 02:27, Glenn <glennp@...> a écrit :
The K3NG ATU lends itself to home brew.   And changes to the power level required. My own build I estimate at around 20-30W and uses smd 2-3kV caps (overkill) and the usual relay switching of L&C. Two relays are used to switch the ends for L-C or C-L. I used standard relays, not latching, due to cost here in VK. Control board uses a NANO with a 0.96" OLED display.


Gilles - F1BFU/FR

Join to automatically receive all group messages.