Re: Winding QCX T1 #t1 #qcx

Richard G4TGJ
 

I took voltage measurements and got a very strange result on T1. 4 connections should be at 0V and 4 at 2.5V, but 1 was at 3.5V! So clearly the enamel hadn't burnt off despite my best efforts. I put the soldering on the joint for another 10 seconds and after that the voltages are now correct. However I still cannot get the phase low and high alignment to work. Very frustrating.

Join QRPLabs@groups.io to automatically receive all group messages.