In the photo of T1 in the QCX manual it shows the 4 windings as very distinctively separate. The 30 turn winding takes up half the toroid and then there are 3x3 turn windings, each being quite tight with a large gap to the next one. In my 30m version all the turns are spread around the toroid fairly evenly. Does this matter?Richard,
With these types of coils it does not actually make much difference.
>I am failing to get a
minimum with the Phase Low and Phase High adjustments and am getting to the end stop.But as Martin says T1 and it's soldering is the first thing to look at.
73 Alan G4ZFQ