Re: Power output on 20 meters.

Steve MW0KST
 

If it's any help, with my 30m version I was only getting about 1W out, with the power rising slowly to around 1.2W on a prolonged key down. I replaced the blue inner caps (they measured about 30pF low) and took 2 turns from each of the LPF inductors. The result is a steady 3.5W output with no gradual increase on key down. Taking the 2 turns off improved the output by about 0.5W. Power measurements were with my LP100A Wattmeter.

No other mods done.

Steve MW0KST

Join QRPLabs@groups.io to automatically receive all group messages.