Date   
Re: Any updates from Dishtronix?

Al Ludwick / NN4ZZ
 
Edited

Hi Larry,
I'm going to Dayton and will ask Mike about it.   I haven't seen any other details but maybe Mike will see this post and give us an update sooner.  I know he is busy but you never know.

According to the vendor list on the Hamvention site he has a booth reserved.



Regards,  Al / NN4ZZ  
al (at) nn4zz (dot) com

Re: Any updates from Dishtronix?

Steven M. \(Mike\) dishop
 

Friends,

 

The new solid state has PLENTY of headroom on 160 and other bands, just like any Dishtronix amp. In fact the new chassis is intended to even build 5K solid states in.  I think it is safe to assume you’ll see 2K on 160 or more. However this isn’t a specification or a promise. This is just idle chat – for now.  I’m not going to promise when it is going to be out. Let’s hope by fall.

 

I finished last year’s big projects and expect to have engineering time available again for the tuner again sometime in April.

 

I’m going to be involved with some other things this year, starting with the process of the new Ten Tec factory.  I’ve selected the site and now have to go from there with the process.

 

You might see something new at the Alpha booth.  Maybe I will divulge more before Hamvention.  

 

73-Mike

 

From: PrometheusDX2400@groups.io [mailto:PrometheusDX2400@groups.io] On Behalf Of Al Ludwick / NN4ZZ
Sent: Saturday, March 17, 2018 5:48 PM
To: PrometheusDX2400@groups.io
Subject: Re: [PrometheusDX2400] Any updates from Dishtronix?

 

Hi Larry,
I'm going to Dayton and will get ask Mike about it.   I haven't seen any other details but maybe Mike will see this post and give us an update sooner.  I know he is busy but you never know.

According to the vendor list on the Hamvention site he has a booth reserved.



Regards,  Al / NN4ZZ  
al (at) nn4zz (dot) com

Re: Any updates from Dishtronix?

Al Ludwick / NN4ZZ
 

Hi Mike,
Thanks for the update, sounds like you will have another busy year or two coming.  See you in Dayton / Xenia.

Regards,  Al / NN4ZZ  
al (at) nn4zz (dot) com

Re: Any updates from Dishtronix?

Kevin
 

Mike,
Thanks for the update. Glad to hear that the tuner will be getting some engineering focus. I have a place waiting in my shack for it. 
Kevin N9JKP




On Sunday, March 18, 2018, 2:51 PM, Steven M. &#92;(Mike&#92;) dishop <steven.dishop@...> wrote:

Friends,

 

The new solid state has PLENTY of headroom on 160 and other bands, just like any Dishtronix amp. In fact the new chassis is intended to even build 5K solid states in.  I think it is safe to assume you’ll see 2K on 160 or more. However this isn’t a specification or a promise. This is just idle chat – for now.  I’m not going to promise when it is going to be out. Let’s hope by fall.

 

I finished last year’s big projects and expect to have engineering time available again for the tuner again sometime in April.

 

I’m going to be involved with some other things this year, starting with the process of the new Ten Tec factory.  I’ve selected the site and now have to go from there with the process.

 

You might see something new at the Alpha booth.  Maybe I will divulge more before Hamvention.  

 

73-Mike

 

From: PrometheusDX2400@groups.io [mailto:PrometheusDX2400@groups.io] On Behalf Of Al Ludwick / NN4ZZ
Sent: Saturday, March 17, 2018 5:48 PM
To: PrometheusDX2400@groups.io
Subject: Re: [PrometheusDX2400] Any updates from Dishtronix?

 

Hi Larry,
I'm going to Dayton and will get ask Mike about it.   I haven't seen any other details but maybe Mike will see this post and give us an update sooner.  I know he is busy but you never know.

According to the vendor list on the Hamvention site he has a booth reserved.



Regards,  Al / NN4ZZ  
al (at) nn4zz (dot) com

Re: Any updates from Dishtronix? Hamvention 2018 update

Al Ludwick / NN4ZZ
 

Hamvention 2018 update — I talked with Mike today at his booth in Xenia.  The Alpha 4040 tuner was on display and he said the tuner is still in the works.  His primary focus is getting his new facility in TN completed so that is taking top priority.  

His current expected delivery date for the 4040 is first quarter of 2019.

On a related note he also had the prototype for his DX2400 Mark II solid state amp at the show.    He plans to have several models (power levels) available and the amp and power supply will all be housed in a single enclosure.  

His curent expected delivery date for the new amp is late 2018 or Q1 2019. 

The dates are not committments since there are other projects that could still take priority but the main take away is that both projects are still planned.

Regards, Al / NN4ZZ

Re: Any updates from Dishtronix? Hamvention 2018 update

Al Ludwick / NN4ZZ
 

Pix of Mark II in current state.

same front control as DX2400 — power supply will be in same chassis.

Regards Al / NN4ZZ

FS: Dishtronix Prometheus Solid State HF Amplifier

Steve Sacco
 

Dishtronix Prometheus Solid State HF Amplifier SN 28

I've decided to simplify the station, and with more than a little regret, letting go of my Dishtronix Prometheus solid state HF amplifier is part of that redesign.

This is easily the best, most heavy-duty solid state amp available to the Amateur Radio community.  

Duty cycle?  100% continuous @ 1,500 watts, SSB, CW/RTTY.  Period.  No "ICAS" or other silliness.   True "brick on the key" stuff, which is interesting, since Dishtronix now owns Alpha, the company which made that term famous.

See the reviews over at eHam: https://www.eham.net/reviews/detail/7302.  I wrote one of those reviews, and still believe every word of what I wrote.

This one has a linear power supply, which while heavy, is much simpler than the switching PS version, and due to its design, to be RF-quiet.

$8,000

I am located in in central Florida.
73,
Steve
NN4X

Dishtronix Prometheus Solid State HF Amplifier SN 28

Steve Sacco
 

Dishtronix Prometheus Solid State HF Amplifier SN 28

I've decided to simplify the station, and with more than a little regret, letting go of my Dishtronix Prometheus solid state HF amplifier is part of that redesign.

This is easily the best, most heavy-duty solid state amp available to the Amateur Radio community.  

Duty cycle?  100% continuous @ 1,500 watts, SSB, CW/RTTY.  Period.  No "ICAS" or other silliness.   True "brick on the key" stuff, which is interesting, since Dishtronix now owns Alpha, the company which made that term famous.

See the reviews over at eHam: https://www.eham.net/reviews/detail/7302.  I wrote one of those reviews, and still believe every word of what I wrote.

This one has a linear power supply, which while heavy, is much simpler than the switching PS version, and due to its design, to be RF-quiet.

$6,750

I am located in in central Florida.
73,
Steve
NN4X

Dishtronix Prometheus Solid State HF Amplifier SN 28

Steve Sacco
 


Dishtronix Prometheus Solid State HF Amplifier SN 28

I've decided to simplify the station, and with more than a little regret, letting go of my Dishtronix Prometheus solid state HF amplifier is part of that redesign.

This is easily the best, most heavy-duty solid state amp available to the Amateur Radio community.  

Duty cycle?  100% continuous @ 1,500 watts, SSB, CW/RTTY.  Period.  No "ICAS" or other silliness.   True "brick on the key" stuff, which is interesting, since Dishtronix now owns Alpha, the company which made that term famous.

See the reviews over at eHam: https://www.eham.net/reviews/detail/7302.  I wrote one of those reviews, and still believe every word of what I wrote.

This one has a linear power supply, which while heavy, is much simpler than the switching PS version, and due to its design, to be RF-quiet.

$6,250

I am located in central Florida.
73,
Steve
NN4X