Date   
Re: AD8307 Compensation frequencies

Roberto
 

I'm sorry I read the message only now I wanted to try it at the moment not tested it but it seems interesting what do you think?
Roberto

Re: AD8307 Compensation frequencies

DaveH52
 

Have you done similar work with the AD8302?

Re: AD8307 Compensation frequencies

DaveH52
 

Thank you!

AD8307 Compensation frequencies

Roberto
 

all groups member
I report this interesting experience of DL6GL
ad8307 comparison
translated from German to English


https://translate.google.it/translate?hl=&sl=de&tl=en&u=https%3A%2F%2Fdl6gl.de%2Fad8307-frequenzkompensation

link original
https://dl6gl.de/ad8307-frequenzkompensation

73 iw5bsf Roberto

Re: Group Milestone

William Kimber
 

Thanks Jim for all that you and Jerry have done.

Cheers,

Will,

ZL1TAO

On 22/12/19 6:40 am, N5IB wrote:
A little while ago Dan, AI2M, joined this group as its 1000th member.
Would have been hard to fathom that back on 10 Sept 2013 when Jerry, W5JH (SK) and I started this little project.

It's been great fun, but I'd like to pass the reins on to another volunteer.
So I'm seeking someone to take on the list owner duties.
For this group its been pretty benign, just approve a membership request or a posting now and again, seldom more than one or two a week.

If you'd like to volunteer, you can reply privately if you wish, either a private reply here, or to <n5ib (at) juno (dot) com>
I would simply change your group membership status to "owner."
I'd nominally continue in "owner" status as well but would be in the manner of a "silent partner."

73
Jim, N5IB


Re: Group Milestone

K5ESS
 

Jim,
I'd be glad to take ownership of the group.
Mike
K5ESS

-----Original Message-----
From: PHSNA@groups.io [mailto:PHSNA@groups.io] On Behalf Of N5IB
Sent: Saturday, December 21, 2019 11:40 AM
To: PHSNA@groups.io
Subject: [PHSNA] Group Milestone

A little while ago Dan, AI2M, joined this group as its 1000th member.
Would have been hard to fathom that back on 10 Sept 2013 when Jerry, W5JH (SK) and I started this little project.

It's been great fun, but I'd like to pass the reins on to another volunteer.
So I'm seeking someone to take on the list owner duties.
For this group its been pretty benign, just approve a membership request or a posting now and again, seldom more than one or two a week.

If you'd like to volunteer, you can reply privately if you wish, either a private reply here, or to <n5ib (at) juno (dot) com>
I would simply change your group membership status to "owner."
I'd nominally continue in "owner" status as well but would be in the manner of a "silent partner."

73
Jim, N5IB

Group Milestone

N5IB
 

A little while ago Dan, AI2M, joined this group as its 1000th member.
Would have been hard to fathom that back on 10 Sept 2013 when Jerry, W5JH (SK) and I started this little project.

It's been great fun, but I'd like to pass the reins on to another volunteer.
So I'm seeking someone to take on the list owner duties.
For this group its been pretty benign, just approve a membership request or a posting now and again, seldom more than one or two a week.

If you'd like to volunteer, you can reply privately if you wish, either a private reply here, or to <n5ib (at) juno (dot) com>
I would simply change your group membership status to "owner."
I'd nominally continue in "owner" status as well but would be in the manner of a "silent partner."

73
Jim, N5IB

Re: Yahoo Groups download

Terry VK5TM
 

I tried that a few weeks ago and the eventual message back was "Nothing to download" so don't rely on it to save something you desperately need.

Terry VK5TM

Yahoo Groups download

DuWayne Schmidlkofer
 

With Yahoo Groups shutting down, and not all of those I subscribe to moving over to groups .io. I wanted to grab a copy of the existing Yahoo Group data.
I found directions on how to grab a download of all your Yahoo grooups at
https://www.theverge.com/2019/11/4/20917500/yahoo-group-data-download-how-to
It took about a week before I received a message that everything was ready to download. Everything from all my subscribed groups ,messages,files,photos were included in a couple large zip files.
DuWayne KV4QB

OT: Yahoo Groups is going away

Terry VK5TM
 

Yahoo Groups is going away.

If you need any files, photo's or other data from any group you are member of, get it now, by the end of December it will all be gone.

Terry VK5TM

Re: Power Meter

Nick Kennedy
 

Well, I did go and try the circuit described in the video. I wanted to see
that feedback circuit work to control output level. I had to fool with some
components to get the loop to control. I was only going to build enough to
see that part in action but wound up adding the LPF and attenuator
eventually.

I cheated on the LPF by using molded chokes instead of toroids. The
performance (using PHSNA, of course) looked decent though. For others
experimenting with this circuit, my changes included:

CA3160 for CA3140
74HC86 for 74AC86
6.2 k for 12 k from MOSFET gate to ground
Added a second diode in series with 5 V to lower the reference voltage to
the op-amp
LPF used molded chokes 1.8, 2.2, 1.8 uH for the LPF
Used a 7.030 crystal
Didn't want to fight with building shielding so I just did the 0 dBm output
My attenuator is a tee, 200 ohms, 27 ohms, 25 ohms
(Attenuator shows 220 ohms to the amplifier and 50 ohms toward the load)

It hit 0 dBm right on the money the first time - I was amazed.

I was intrigued by that integrating capacitor feedback. What's its
function? Is it needed? Well, it seems to work better with than without. I
guess it has a stabilizing effect.

It was interesting that when I'd experiment with lowering supply voltage,
the mosfet drain current would take off going to over 100 mA versus typical
35 mA when voltage went below 7.5 or so.

I could not get the "battery low" LED scheme to work. My LEDs may be too
sensitive, if that's the word for it.

Thanks again Hans for an informative video.

73-

Nick, WA5BDU

On Fri, Sep 13, 2019 at 8:52 AM Nick Kennedy <kennnick@...> wrote:

Very nice circuit Hans, and a great video to describe it in detail. I'd
be tempted to try to duplicate it but I've already got several "watches"
that give me a well defined RF level.

73-

Nick, WA5BDU


On Thu, Sep 12, 2019 at 7:46 AM Hans Summers <hans.summers@...>
wrote:

Hi JoergU

There is a very nice power calibrator design available from a German
ham.
Just google for "dl7av calibration". Use a translator, to translate the
German text.
It creates a 0 dBm sine output. I built it myself (cost approx. 10 EUR)
and the
harmonics are >30 dB suppressed.
Many thanks for this. Very rare for this to happen, but it happened to be
exactly WHAT I needed and WHEN I needed it... so I googled DL7AV
calibration and found several pages, of which the main one I followed was
http://dl6gl.de/station/selbstregelnder-kurzwellen-kalibrierungsgenerator

So I built my own version from entirely junkbox parts yesterday afternoon
and I have made a YouTube video about it see https://youtu.be/732ESoul088

This will be very useful in my case - thanks again!

73 Hans G0UPL
http://qrp-labs.com



Re: Power Meter

Glen Leinweber
 

Hans,
This little item begs its "0dbm" output to be christened with a QSO. Seems its
harmonic content may require a bit more filtering for this use.

I wonder if its -30dBm 2nd harmonic might be useful as an amplitude
calibration signal for 20M as well as its 40M 0dBm output?

Re: Power Meter

Nick Kennedy
 

Very nice circuit Hans, and a great video to describe it in detail. I'd be
tempted to try to duplicate it but I've already got several "watches" that
give me a well defined RF level.

73-

Nick, WA5BDU

On Thu, Sep 12, 2019 at 7:46 AM Hans Summers <hans.summers@...> wrote:

Hi JoergU

There is a very nice power calibrator design available from a German ham.
Just google for "dl7av calibration". Use a translator, to translate the
German text.
It creates a 0 dBm sine output. I built it myself (cost approx. 10 EUR)
and the
harmonics are >30 dB suppressed.
Many thanks for this. Very rare for this to happen, but it happened to be
exactly WHAT I needed and WHEN I needed it... so I googled DL7AV
calibration and found several pages, of which the main one I followed was
http://dl6gl.de/station/selbstregelnder-kurzwellen-kalibrierungsgenerator

So I built my own version from entirely junkbox parts yesterday afternoon
and I have made a YouTube video about it see https://youtu.be/732ESoul088

This will be very useful in my case - thanks again!

73 Hans G0UPL
http://qrp-labs.com



Re: Power Meter

Alfredo Mendiola Loyola
 

I will try it LAter, I have bought a power meter LadyBug LB478.
RegardsAlfredo Mendiola Loyola

On Thursday, September 12, 2019, 07:46:20 AM GMT-5, Hans Summers <hans.summers@...> wrote:

Hi JoergU

There is a very nice power calibrator design available from a German ham.
Just google for "dl7av calibration". Use a translator, to translate the
German text.
It creates a 0 dBm sine output. I built it myself (cost approx. 10 EUR)
and the
harmonics are >30 dB suppressed.
Many thanks for this. Very rare for this to happen, but it happened to be
exactly WHAT I needed and WHEN I needed it... so I googled DL7AV
calibration and found several pages, of which the main one I followed was
http://dl6gl.de/station/selbstregelnder-kurzwellen-kalibrierungsgenerator

So I built my own version from entirely junkbox parts yesterday afternoon
and I have made a YouTube video about it see https://youtu.be/732ESoul088

This will be very useful in my case - thanks again!

73 Hans G0UPL
http://qrp-labs.com

Re: Power Meter

Hans Summers
 

Hi JoergU

There is a very nice power calibrator design available from a German ham.
Just google for "dl7av calibration". Use a translator, to translate the
German text.
It creates a 0 dBm sine output. I built it myself (cost approx. 10 EUR)
and the
harmonics are >30 dB suppressed.
Many thanks for this. Very rare for this to happen, but it happened to be
exactly WHAT I needed and WHEN I needed it... so I googled DL7AV
calibration and found several pages, of which the main one I followed was
http://dl6gl.de/station/selbstregelnder-kurzwellen-kalibrierungsgenerator

So I built my own version from entirely junkbox parts yesterday afternoon
and I have made a YouTube video about it see https://youtu.be/732ESoul088

This will be very useful in my case - thanks again!

73 Hans G0UPL
http://qrp-labs.com

Re: Power Meter

Joerg - exDB2OO
 

There is a very nice power calibrator design available from a German ham. Just google for "dl7av calibration". Use a translator, to translate the German text. It creates a 0 dBm sine output. I built it myself (cost approx. 10 EUR) and the harmonics are >30 dB suppressed.

Re: WB6OGD Local and Sweep Version

wb6ogd
 

Everything is already uploaded.
Look in the Files section for folder:
WB6OGD Local and Sweep Version WithSi5351

https://groups.io/g/PHSNA/files/WB6OGD%20Local%20and%20Sweep%20Version/WithSi5351

See the ReadMe file. The version with the si5351 has excess code, may require some experimentation
and edits, though it does work for me. It includes an antenna analyzer that doesn't work correctly,
SDR 4xfrequency, etc.

Note: this code is not supported by this group, only by me!
On the PC side, you just use Nick's supported code but possibly the older versions?
You can of course run it standalone but things like LCD address, etc might need edits.
Let me know if you need help,
73,
Gary
WB6OGD

WB6OGD Local and Sweep Version

tanveerriaz70pk
 

hi
wich win software i use for your code for si5351?
if you made a software pls up load.
thanks

Re: AD9851 Multiplier and Frequency Accuracy

Alfredo Mendiola Loyola
 

Thank you for the information Clifford.
Alfredo Mendiola Loyola OA4AJP

On Sunday, May 26, 2019, 5:35:12 PM GMT-5, Clifford Heath <clifford.heath@...> wrote:

Same frequency accuracy because that's locked to your source, but will have
some additional phase noise because that depends on the multiplication
method (the VCO, the phase comparator and the loop filter). The data sheet
will tell you more.


On Mon, 27 May 2019, 04:12 Alfredo Mendiola Loyola via Groups.Io
<mendiola_loyola=yahoo.com@groups.io> wrote:

Hello,

If I use a TCXO oscillator with a frequency accuracy of 1ppm with an
AD9851 which have activated the 6x Multiplier, will the multiplied
frequency have the same accuracy of 1ppm?

Example:
Input: TCXO 10 Mhz with 1ppm
Output: AD9851 60 Mhz with X ppm

Will the value of X be 1 ppm ?

Regards
Alfredo
OA4AJP



Re: AD9851 Multiplier and Frequency Accuracy

Clifford Heath
 

Same frequency accuracy because that's locked to your source, but will have
some additional phase noise because that depends on the multiplication
method (the VCO, the phase comparator and the loop filter). The data sheet
will tell you more.


On Mon, 27 May 2019, 04:12 Alfredo Mendiola Loyola via Groups.Io
<mendiola_loyola=yahoo.com@groups.io> wrote:

Hello,

If I use a TCXO oscillator with a frequency accuracy of 1ppm with an
AD9851 which have activated the 6x Multiplier, will the multiplied
frequency have the same accuracy of 1ppm?

Example:
Input: TCXO 10 Mhz with 1ppm
Output: AD9851 60 Mhz with X ppm

Will the value of X be 1 ppm ?

Regards
Alfredo
OA4AJP