Hi Jonathan, Congratulations on the new rewriting rule! Could it be chained to the TGRewriteRule? Let me explain: In my area, we have a DMR+ master, and my radio is configured for all local talkgroups

Hi all. Well I found the problem, if you enter any other CTCSS frequency than the default of 88hz, MMDVM crashes! 73 Phil

Jonathan, I made a post a while back about trying to find someone to work on improving the existing opensource AMBE vocoder that we have (a solution for those who host cloud based bridges). I'm

Hi Jonathan. I have been trying to get the FM branch to work but there seems to be something “amiss”. Not sure what hardware you have tested it on but on my v1.0 MMDVM-Pi (STM32F7xx

Hi Jonathan. I have a test repeater here that I use for development with a Zum MMDVM-Pi board so I will have a play! 73 Phil M0VSE

This message contains important information that I want disseminated far and wide please. I have been approached by the people who run aprs.fi and REF001/REF030 (not the same people) about problems

Things have moved on a little. I've been busy. 1. The Icom to Kenwood NXDN gateway is close to being finished, unfortunately a lot of it is guesswork and it hasn't been used in anger yet. Indeed as

I think what is happening is the reflector at the other end is disconnecting me due to some timeout - either inactivity (sadly) or simply total amount of time connected. Not every reflector does

A good friend made this up for me. Looking good on this Document http://hamradio.joomla.com/images/PDF/Linking_to_Gateway_Dynamic_Talk_Groups.pdf Norman 73

Hi Jonathan We ran it last night and it was working 100% Have set for 90 to 999999 The only issue was Static Talk Group and this falls under what Simon is working on. TGRewrite=2,9,2,23510,1 So if

Hi Norman That's the idea, which is why choosing the Talk Group is via a Private Call. In fact I've expanded it to allow almost all of the functions to be either a Talk Group or a Private Call now. In

We have that working now at this end :) Norman 73

I'll get back on the case Norman. I have been pleasantly distracted by a new 4m radio and antenna this weekend ;-) 73 Simon

I can not get 4000 unlink or 5000 status to go back out on TG9 Always comes back to me Anyway to make this happen ?? Norman

Talk Groups time out at 10 mins This is why we need what Simon is working on Norman 73

Looks like a good mechanism to mimic reflector operation. How long will they remain connected, I'm gathering only a short amount of time compared to the existing reflector

Thanks Jonathan! I will have a play. Simon

Can someone make a Logo for " TGDynRewrite " This way we can put on Webpages to say this system is on offer. Many thanks Norman

Hi Folks After working with Jon G4TSN with beta versions of this new rewrite rule for the DMR Gateway, it has now been merged into master and available for all to play with. This allows for the use of

Hi Jonathan Can I request that you can call a Talk Group via Manual Dial Private Call. This would mean a new read write for Private Call 1 to 99999 apart for 9990 echo to read write to Group Call and