Tindie out of stock - I have purchased their last unit :) Looking forward to get it, and review it! Luis, CT2FZI

Hello, To upgrade screen size plug-n-play style, this is confirmed to work: #Aliexpress € 6,26 17%OFF | 3.2 inch 320*240 TFT LCD Module Display Screen with Touch Panel Driver IC ILI9341 240(RGB)*320 S

Hello, One can found a great review(s) on our mother group: https://groups.io/g/nanovna-users/message/12034 Great reading and findings...! CT2FZI

User manual: https://github.com/nanovna/NanoVNA-QT/raw/master/ug1101.pdf NanoVNA/QT software: https://github.com/nanovna/NanoVNA-QT/releases (for using via PC and/or upgrading your nanoVNA-V2) CT2FZI

The nanovna-v2 was offered by hdxqs group on tindie at one point with a set of calibration kit components and test cables. The posting now shows recommended test cable types (SS405, RG405, RG316) but

Hi, just found that the current Github has added support for MacPort and Homebrew for installing the NanoVNA-QT app. I can be installed with sudo port install NanoVNA-QT. I found that you have to defi

DuWayne Schmidlkofer wanted to see if using a torque wrench could help make his readings a little more consistant. Looking around he saw that even the cheap SMA torque wrenches are nearly as expensive

I managed to obtain a long list of ePacket tracking numbers from various suppliers (after asking nicely ;)), so I tracked them and produced these graphs in "excel" (libreoffice calc) of the delivery t

A quick test where the SAA-2 was calibrated with HP85033C 3.5mm male kit and by use of Touchstone files with 500 points from 0.1 to 3000MHz, also used for sweep with 500 point, shows excellent results

Kurt, Rune has not released a version of NanoVNA-Saver for the S-A-A-2 (V2) yet, however Holger Muller has submitted a branch with modifications for the V2 at https://github.com/zarath/nanovna-saver/t

Kurt, congratulations on being selected as a moderator! I believe Luis has made an excellent selection. I have always found your contributions to be fair, impartial and backed up by technical expertis

A few long-standing issues are fixed: Firmware: - You can now exit USB mode. After closing NanoVNA-QT, long press the middle button on the device. - TDR for >101 points is now fixed and you can use TD

I uploaded a S-A-A-2 Menu Map to the "Files" section, https://groups.io/g/NanoVNA-V2/files/User%20Manuals,%20How2,%20Examples/SAA2%20Menu%20Map.pdf . Anyone know the purpose of the CONFIG->DMESG menu?

We are temporarily unable to fulfill the 60 days refund or reshipment guarantee at this time because a large portion of shipments take longer than 60 days to arrive. There will be insufficient funds t

For those who may have missed it, Gabriel posted the following on the groups.io NanoVNA forum: " Gabriel Tenma White10:22am #13206 I was sent an image today, which is allegedly a new V2 clone on the m

Hi everyone; Does some guys are motivated to convert/rewrite the NanoVNA-V2 schematics/board to KiCad ? As actual format done with Geda is clearly not usable ... Lot of improvement could be done if it

Hi all, what would the port ratings be on the NanoVNA-V2? I mean the max x VDC and y dBm RF you see on the yellow stickers on instrument ports. Looking at the schematics one could assume that the 10uF

The links are: 20200501 Firmware: https://github.com/nanovna/NanoVNA-V2-firmware/releases NanoVNA-QT release 20200507: https://github.com/nanovna/NanoVNA-QT/releases Kind regards Kurt

The 3.2" display I ordered for my S-A-A-2 arrived today (see attachment). It took all of about 5 minutes to unscrew the old 2.8" display, remove it from the 14-pin socket and plug the 3.2" display int