Date
1 - 20 of 37
SAA-2N Firmware Upgrade
|
|
|
|
|
Dave Neal
Can you give me the path to the SAA2-Google Drive
Thanks |
|
|
|
Siegfried Jackstien
You can try both :-)
toggle quoted message
Show quoted text
Dg9bfc sigi Am 17.04.2022 10:06 schrieb 4z1tl <tsachyl@...>:
|
|
|
|
Hi all
At the risk of being a bit redundant my apologies in advance. Which upgrade route should I take if my SAA-2N device shows version built on June-09-2021 17:36:19: "SAA2N-220225.bin" from SAA2-Google Drive, or "DiSLord's v 1.1.00.bin" posted earlier here ? Thanks in advance Isaac 4Z1TL |
|
|
|
Karl Jan Skontorp
Yes, it is!
https://zeenko.tech/litevna and https://groups.io/g/liteVNA/topics - but just a few members yet 72 and only a few messages.... Karl |
|
|
|
D Nordquest
Thanks, Robert! I installed NanoVNSApgrade/V2 480x320 v1.1.00.bin from
DiSlord package on my V2N & it works fine! DiSlord suggested in an earlier post that the difference in length between this file and one posted by Gen Hu (Hugen) on Google Drive might have to do with support for SD drive.The DiSlord package has it. Dave <"Header for others are unlikely as the compiler throws out what is not used... perhaps left a debug option on and included the labels... Best regards, Robert " > On Wed, Dec 22, 2021 at 4:19 PM Robert via groups.io <rfaass= yahoo.com@groups.io> wrote: Header for others are unlikely as the compiler throws out what is not |
|
|
|
Robert
Header for others are unlikely as the compiler throws out what is not used... perhaps left a debug option on and included the labels...
toggle quoted message
Show quoted text
Best regards, Robert, 360 774 2736. On Tuesday, December 21, 2021, 06:14:19 PM PST, D Nordquest <nordquest@...> wrote:
Earlier I asked about the relation between: NanoVNSApgrade/SAA2N-D-211210.bin posted by Gen Hu (Hugen) on Google Drive on !2/19 (74.5 K) and NanoVNSApgrade/V2 480x320 v1.1.00.bin (in the original set of files posted by Dislord on 12/17 (85.1k) Very helpful nessages show the latter file is working well on 2N's. But I'm still wondering what the difference in the files is. Anyone know if they differ and which might be better for the 2N. Is it just that the former file was compiled specifically for the 2N and therefore leaves out headers etc for other models -- as one post seemed to suggest? Thanks! Dave On Tue, Dec 21, 2021 at 2:32 PM Corneliu via groups.io <coralenka= yahoo.com@groups.io> wrote: Thanks ! |
|
|
|
https://groups.io/g/liteVNA/message/68
*Sent:* Wednesday, December 22, 2021 at 2:35 AM *From:* "Dale Parfitt" <PARINC1@...> *To:* NanoVNA-V2@groups.io *Subject:* Re: [NanoVNA-V2] SAA-2N Firmware Upgrade Is there a group for the new LiteVNA? I would like to learn more about it. Regards, Dale W4OP |
|
|
|
D Nordquest
Many thanks for the clarification, DiSlord! And thank you for your great
toggle quoted message
Show quoted text
work with the firmware! Best, Dave On Tue, Dec 21, 2021 at 10:10 PM DiSlord <dislordlive@...> wrote:
V2 480x320 v1.1.00.bin |
|
|
|
DiSlord
V2 480x320 v1.1.00.bin
Also ckntain SD card support (if you made hardware mod) SAA2N-D-211210.bin (if i correct understand, Hugen build last version, but disable SD card option) |
|
|
|
Dale Parfitt <PARINC1@...>
Is there a group for the new LiteVNA? I would like to learn more about it.
Regards, Dale W4OP |
|
|
|
D Nordquest
Earlier I asked about the relation between:
NanoVNSApgrade/SAA2N-D-211210.bin posted by Gen Hu (Hugen) on Google Drive on !2/19 (74.5 K) and NanoVNSApgrade/V2 480x320 v1.1.00.bin (in the original set of files posted by Dislord on 12/17 (85.1k) Very helpful nessages show the latter file is working well on 2N's. But I'm still wondering what the difference in the files is. Anyone know if they differ and which might be better for the 2N. Is it just that the former file was compiled specifically for the 2N and therefore leaves out headers etc for other models -- as one post seemed to suggest? Thanks! Dave On Tue, Dec 21, 2021 at 2:32 PM Corneliu via groups.io <coralenka= yahoo.com@groups.io> wrote: Thanks ! |
|
|
|
Ed Wilson
It appears that my update was successful too!
Did this update just address "bugs" or are there some new features? Ed, K0KC |
|
|
|
Corneliu
Thanks !
|
|
|
|
Ed Wilson
Thanks! I will give it a try this afternoon.
Ed, K0KC |
|
|
|
aleks07111971@...
Yes!:)
|
|
|
|
Ed Wilson
May I assume that V2 480x320 v1.1.00.bin attached above is in response to my December 20 post?
Thanks, Ed, K0KC |
|
|
|
aleks07111971@...
Good DiSLord
|
|
|
|
Ed Wilson
I guess I started this thread back in August when I was concerned with which version of 1.0.69 was compatible with my SAA-2N with a 4 inch screen. Now I see we have another upgrade to 1.1.0 and I am not sure which file is appropriate for my NanoVNA as there are 10 different files included in the zip file.
I would sincerely appreciate any guidance on which file to use for the upgrade. Thanks, Ed, K0KC |
|
|
|
aleks07111971@...
Use firmware from DiSLord 1.1.0.
The type of connectors is not important, the instrument boards are the same! The difference in connectors, the device will remove during calibration! |
|
|
