The only way to scroll up or down looking through the main log is to use those tiny arrows at the corners. Having last 50 displayed is not a big deal, but if there is entire log it's a major pain. Acc

I am wanting to substitute the "other" field heading on my main screen with " Contest ID", which is way off my screen to the right, following the "PC Name" field. However, the "Edit Fields Displayed"

This morning, I noticed that I have two FT8 QSO entries in ACL which contain the same State, County and operator Name. One entry is obviously incorrect: HK4EIC The other entry is correct: N5GFH Why is

I set an alert for a needed spot last weekend, and now ACL v6.8 continues to alert Watch List empty and LOTW alert all un-checked. What am I missing? Tnx, Dennis-WU6X

Hi Gang, Just a quick reminder that we have two contests this weekend: CQ 160 SSB (which actually starts Friday evening at 5:00 PM EST) & NAQP RTTY! CQ 160 SSB: Software: http://www.n3fjp.com/cq160met

I would like to have my normal AC Log setup on my laptop to use when portable. But I would also like to have a modified version of AC Log to use with POTA on the same computer. WHat is the best way to

Hi All, While I've had lots of great reports from folks who have configured AC Log for POTA as detailed here: How do I configure AC Log for proper ADIF output for WWFF Parks on the Air (POTA)? http://

How can I list several counties if I am on a border between counties? Respectfully, Van N4VGE

Having happily used Scott’s software for years with my Flex 6500, I installed the N7YG Digital Engine but found when setting it up that the documentation says “At this time there is no provision to ke

Hello Scott. I am trying to work all entities and have 248 logged now, with 92 remaining. Is there any way or setting in your AC Log that will alert me of a needed country from the DX Cluster? I previ

Is there anyway to make these three values be calculated from the info received from QRZ? So that they are more precise. Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 31

During some work in Settings>Appearance>Color and Fonts: Regardless of changes I make in Text Font, the Label 'banner' horizontally overlaps the Text in the Label box by about 50%. As this is true on

After disabling DX Spotting and selecting "Edit Fields Displayed Position and Tab Order", the box "Please First Set Form size to 100%" opens. I choose "Yes" to having the system update the settings. T

What's the easiest way to populate multiple log entries, in the "comments" area, with a constant like "WW CW"? Virus-free. www.avg.com

Scott & Kimberly, Thank you for making such a great log! Operating this contest was such a delight, especially since I slipped on ice last week and broke my hand and knee cap, so was pretty much confi

Noticed something. When tabbing from the CALL box and the last LOTW upload is listed all dates are from August 2017. But when I go to the LOTW web site and put the same calls in the FIND CALL box a ne

Hello, I've been a user of ACL for years but just got a new radio, the Yaesu FT-DX10, that has been out on a couple of months. I used the "yeasu-newer" settngs and that works fine with one odd quirk.

Fantastic program and thanks for all the hard work that went into making this one of the best loggers out there! Due to shack "rearrange", I have one of two computer monitors in the "vertical" orienta

Hi Scott, I am setting up AC Log for a multi radio configuration and came across a few things that might be able to be address within coding. The scenario below is with a Yaesu FT991A and a Kenwood TS

Hi: QRZ data displays only after clicking the "Comments" field. I recall all data (name, address, etc.) was displayed as soon as the Call field was populated. Thanks and 73. W1JHG -Jim James H. Goff 2