Scott, I checked all the items you mentioned, and the problem persists. I tried my N3FJP logs from previous contests, all configured for transmitting CW, which worked perfectly in those contests, but

I have tried two different USB interface cables and get the same result, the ACL will not read the frequencies from my 718. I am using Windows 10 and the Device Manager shows the com port device is wo

I am thinking of checking out the DX spotting software and I cannot seem to find the pages indicating how to set it up. I am also interested if it sends texts or emails for the spots you are after. Th

Hi Rick, Thanks so much for your good report, kind words, encouragement and support! Be well and enjoy! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio community with contesting and gen

I used the built in voice keyer this past weekend in the 160 contest and it worked fine. My question is can I add my own switches to a DB9 comport to access the same wav files? The reason is I run a F

Richard Ingels 11:04am #47141 Your timing is excellent! I was just about to abandon ACL for another program due to this issue and you fixed it on the very day I was going to pull the plug. I love ever

OK, I may be missing something. In most of the Contest logs there is a "Spot Last" capability or button to spot your last QSO. Is this capability available on the ACLog? If I want to spot I have to go

Any idea which N3FJP contest program I could use for the Open Ukraine RTTY Championship? Exchange is state + serial # ie PA-001 I believe it is a 4 or 5 character exchange with state and serial combin

I have regularly used my N3FJP logger programs to key my IC-7300 on CW mode. Today my CWOps CWT logger, which I use every week, did not key the rig when I pressed a function key on the computer. The s

To you old timers... I used to really chase DX and bought a wad of "green stamps" to send to the DX station for postage. Are these still in use? I see nothing about them any longer. Bill WA7WS

Hello All I am looking to get rid of screen clutter (2 monitors still not enough) and came up with the idea of using Virtual Desktop. What I wish to do is have the following setup Virtual Desktop 1 wi

There are new country files for ACLog and related software by N3FJP. To update the country files from the logging program menu, select: Files -> Download Country Files From AD1C You should download al

I have edited my logs to remove the data supplied by the native call book for submission to POTA. I shouldn't have done that. I've only done that on about a third of my submissions.. but I'd like to g

I thought I had everything set up correctly, but after I click on the call, name and state, it all shows up in FLDIGI correctly. But when I click the save button and go back to N3FJP, there is no log

Newbie mistake probably! Just started using the sw a couple of days ago. Everything looked good between N3FJP and LOTW. I added a bunch of comments in N3FJP I'd been unable to log elsewhere (was just

Gday to all in our most fabulous hobby, Due to my clumsiness, I need to alter many files' info, e.g., when I do an "ALL CONTACTS NOT UPLOADED", I receive the IGNORE pop-up because many QSO have alread

Morning all, My radio is a FTDX1200 with a SCU-17 running on COM3. I'm using AC Log (new at it). I can use AC Log without any problem, the Rig interface is on COM3 and it reads the Band and Frequency

On Saturday I used version 2.6 of N3FJP SC QSO Party Software. The QSO party instructions had a list of 4 letter abbreviations for the SC counties. When entering a QSO in the software and typing SPAR

I am a relatively new user to N3FJP. I ran the 160 SSB contest and when I created the log, everything is ok except for the last column which I think is probably meant for the number of points for the

Hello all, I have been using N3FJP for a couple of years or so. No real issues until today. My rig is a Yaesu FT-950 and I am using Windows 7 with a Rig Expert Plus Interface. I use com4 for cat contr