Hi For a few days now iam operating the ic 7300 with the new upgrade. Using the radio without A pc connect to it is fine but at the moment I connect any software for contest or in this case Aclog I fi

I have recently set up a new log for my new QTH. I decided start DXCC from scratch from this QTH just to have something to do. I have just noticed that in "View Statistics" I have credit for 102 count

Hi All, While I've had lots of great reports from folks who have configured AC Log for POTA as detailed here: How do I configure AC Log for proper ADIF output for WWFF Parks on the Air (POTA)? http://

I’m running ACL 6.8.5.1. Columns in the logsheet must be re-adjusted each time I open ACL. Your FAQ says after 4.0 changes will be saved automatically. Apparently that’s not happening here. At full sc

Good morning Sir. I am pleased to inform you that I managed to import my contest logs into N3FJP from HRD, and subsequently exported the Cabrillo file which I have now uploaded on the ARRL Contest Por

AS I initiated a FT8 call in WSJT-X and before it was finished(i.e. getting 73)my call column in the ACL started filling up with my call sign and showed other callsigns in the Comments section like I

I purchased the G90 to use for POTA/SOTA activations this week and have two small issues. I did a lot of research before the rig arrived, and I know the support for the Xiegu is very limited. I succes

My ACLog no longer loads (starts up). This is the error I receive: Error parsing c:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config Parser returned error 0x800004005 Has anyone else g

Good evening, I took part in last weekends ARRL SSB DX Contest (as a DX station) and (unwisely it turns out) logged my QSO’s in Ham Radio Delux. I assumed that it would be a straight-forward matter to

I just notice the spot last button, wonderful and easy, -- TS590SG, 100 Watts, off center fed dipole. 73, Rino VE9VIC

Maybe it' there but I did not find it, say I type N3FJP in the call box(or click on the dx page to get the call sign) then I get all the information available, but for some reason, pile up etc... it t

Hi Rino, Thanks for the report. Something is amiss in your customized data entry field file. Would you please e-mail me the referenced file direct. I would like to try and open it here. 73, ScottN3FJP

Dumb question: Just passed General will adding /AG to call sign mess up my LOTW, QRZ or eQSL logs? Wyndell Resistance is NOT futile, it's Voltage divided by Current This email has been checked for vir

I’m probably missing something simple here – but how does one change bands (via rig control) from any of the Contest Log screens? The drop down “BAND” menu shows which one is active (with a check mark

Hi All, I've been working hard on the screen sizing code for AC Log. This is tougher than it sounds under any circumstance, but especially with all the AC Log customization options AC Log provides. Th

My new computer won't let me use the logging programs. Using Windows 10 and am overwhelmed with trying to figure out the ports and rig interface issues. Wondering if Windows 10 has some settings that

I have everything humming along nicely. But am trying to figure this out: when I work a DX station I like to say something in the Comments box on the form.. like nice signals into NYC or whatever. I d

Hello Kimberly and Scott - During a slow periods in this past weekends DX contest I was looking at my logging program features that I don't normally use. I found one under HELP, the Frequency Privileg

I have the form all set the way I like it but there is one field with a very weird display issue. It's the Other5 field, which I have renamed CWops; it's got a bite taken out of the right side. I've c

Hi all Blind screen reader user here. In the contest loggers, how do I go back to view older contacts and not only the last 50? In AC Log this is easy, you just set whatever you want to view under the