Topics

Question


kc6mie
 

I must have made a change accidentally. AC log shows SSB but I’m working FT8 and when it logs it shows FT8. What did I select to have this happen. I can’t change it in AC log.



Stephen Spencer


kc6mie
 

Maybe it’s been showing SSB all along but I thought it showed FT8?

Stephen Spencer

On Oct 10, 2020, at 7:12 PM, kc6mie <kc6mie@...> wrote:

I must have made a change accidentally. AC log shows SSB but I’m working FT8 and when it logs it shows FT8. What did I select to have this happen. I can’t change it in AC log.



Stephen Spencer





<IMG_3096.JPG>


Mel Marcus
 

why are you saying you cannot change it?

Mel
NE9A

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 9:23 pm
To: N3FJPSoftwareUsers@groups.io

Maybe it’s been showing SSB all along but I thought it showed FT8?

Stephen Spencer

> On Oct 10, 2020, at 7:12 PM, kc6mie <kc6mie@...> wrote:
>
> I must have made a change accidentally. AC log shows SSB but I’m working FT8 and when it logs it shows FT8. What did I select to have this happen. I can’t change it in AC log.
>
>
>
> Stephen Spencer
>
>
>
>
>
> <IMG_3096.JPG>







kc6mie
 

In AC log, I use the drop down and choose FT8, in a few seconds it reverts back to SSB

Stephen Spencer

On Oct 10, 2020, at 7:33 PM, Mel Marcus <melm@...> wrote:


why are you saying you cannot change it?

Mel
NE9A
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 9:23 pm
To: N3FJPSoftwareUsers@groups.io

Maybe it’s been showing SSB all along but I thought it showed FT8?

Stephen Spencer

> On Oct 10, 2020, at 7:12 PM, kc6mie <kc6mie@...> wrote:
>
> I must have made a change accidentally. AC log shows SSB but I’m working FT8 and when it logs it shows FT8. What did I select to have this happen. I can’t change it in AC log.
>
>
>
> Stephen Spencer
>
>
>
>
>
> <IMG_3096.JPG>







Justin Lentz
 

I use JT alert to automatically transfer it over and it logs it as FT8

Justin Lentz KF5IVJ
Ellis County Amateur Radio Club President and Program 


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of kc6mie <kc6mie@...>
Sent: Saturday, October 10, 2020 9:23:24 PM
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] Question
 
Maybe it’s been showing SSB all along but I thought it showed FT8?

Stephen Spencer

> On Oct 10, 2020, at 7:12 PM, kc6mie <kc6mie@...> wrote:
>
> I must have made a change accidentally. AC log shows SSB but I’m working FT8 and when it logs it shows FT8.  What did I select to have this happen.  I can’t change it in AC log.
>
>
>
> Stephen Spencer
>
>
>
>
>
> <IMG_3096.JPG>







kc6mie
 

I use JTalert too. I just never noticed try he SSB in the AC log screen.

Stephen Spencer

On Oct 10, 2020, at 8:19 PM, Justin Lentz <kf5ivj@...> wrote:


I use JT alert to automatically transfer it over and it logs it as FT8

Justin Lentz KF5IVJ
Ellis County Amateur Radio Club President and Program 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of kc6mie <kc6mie@...>
Sent: Saturday, October 10, 2020 9:23:24 PM
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] Question
 
Maybe it’s been showing SSB all along but I thought it showed FT8?

Stephen Spencer

> On Oct 10, 2020, at 7:12 PM, kc6mie <kc6mie@...> wrote:
>
> I must have made a change accidentally. AC log shows SSB but I’m working FT8 and when it logs it shows FT8.  What did I select to have this happen.  I can’t change it in AC log.
>
>
>
> Stephen Spencer
>
>
>
>
>
> <IMG_3096.JPG>







Mel Marcus
 

sounds like it is reading the rig, which most likely in SSB when you are doing FT8

Mel
NE9A

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 10:10 pm
To: N3FJPSoftwareUsers@groups.io

In AC log, I use the drop down and choose FT8, in a few seconds it reverts back to SSB

Stephen Spencer

On Oct 10, 2020, at 7:33 PM, Mel Marcus <melm@...> wrote:


why are you saying you cannot change it?

Mel
NE9A
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 9:23 pm
To: N3FJPSoftwareUsers@groups.io

Maybe it’s been showing SSB all along but I thought it showed FT8?

Stephen Spencer

> On Oct 10, 2020, at 7:12 PM, kc6mie <kc6mie@...> wrote:
>
> I must have made a change accidentally. AC log shows SSB but I’m working FT8 and when it logs it shows FT8. What did I select to have this happen. I can’t change it in AC log.
>
>
>
> Stephen Spencer
>
>
>
>
>
> <IMG_3096.JPG>







Mel Marcus
 


I bet you have the mode determined by rig button turned on

Mel
NE9A
a

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 10:10 pm
To: N3FJPSoftwareUsers@groups.io

In AC log, I use the drop down and choose FT8, in a few seconds it reverts back to SSB

Stephen Spencer

On Oct 10, 2020, at 7:33 PM, Mel Marcus <melm@...> wrote:


why are you saying you cannot change it?

Mel
NE9A
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 9:23 pm
To: N3FJPSoftwareUsers@groups.io

Maybe it’s been showing SSB all along but I thought it showed FT8?

Stephen Spencer

> On Oct 10, 2020, at 7:12 PM, kc6mie <kc6mie@...> wrote:
>
> I must have made a change accidentally. AC log shows SSB but I’m working FT8 and when it logs it shows FT8. What did I select to have this happen. I can’t change it in AC log.
>
>
>
> Stephen Spencer
>
>
>
>
>
> <IMG_3096.JPG>







kc6mie
 

Yes it is, maybe it’s always displayed that and it shows FT8 when logged.  Thanks.

Stephen Spencer

On Oct 10, 2020, at 11:01 PM, Mel Marcus <melm@...> wrote:


sounds like it is reading the rig, which most likely in SSB when you are doing FT8

Mel
NE9A
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 10:10 pm
To: N3FJPSoftwareUsers@groups.io

In AC log, I use the drop down and choose FT8, in a few seconds it reverts back to SSB

Stephen Spencer

On Oct 10, 2020, at 7:33 PM, Mel Marcus <melm@...> wrote:


why are you saying you cannot change it?

Mel
NE9A
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 9:23 pm
To: N3FJPSoftwareUsers@groups.io

Maybe it’s been showing SSB all along but I thought it showed FT8?

Stephen Spencer

> On Oct 10, 2020, at 7:12 PM, kc6mie <kc6mie@...> wrote:
>
> I must have made a change accidentally. AC log shows SSB but I’m working FT8 and when it logs it shows FT8. What did I select to have this happen. I can’t change it in AC log.
>
>
>
> Stephen Spencer
>
>
>
>
>
> <IMG_3096.JPG>







kc6mie
 

I’ll look.

Stephen Spencer

On Oct 10, 2020, at 11:02 PM, Mel Marcus <melm@...> wrote:



I bet you have the mode determined by rig button turned on

Mel
NE9A
a
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 10:10 pm
To: N3FJPSoftwareUsers@groups.io

In AC log, I use the drop down and choose FT8, in a few seconds it reverts back to SSB

Stephen Spencer

On Oct 10, 2020, at 7:33 PM, Mel Marcus <melm@...> wrote:


why are you saying you cannot change it?

Mel
NE9A
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 9:23 pm
To: N3FJPSoftwareUsers@groups.io

Maybe it’s been showing SSB all along but I thought it showed FT8?

Stephen Spencer

> On Oct 10, 2020, at 7:12 PM, kc6mie <kc6mie@...> wrote:
>
> I must have made a change accidentally. AC log shows SSB but I’m working FT8 and when it logs it shows FT8. What did I select to have this happen. I can’t change it in AC log.
>
>
>
> Stephen Spencer
>
>
>
>
>
> <IMG_3096.JPG>







kc6mie
 

Is that setting in AC, WSJTX or JTalert?

Stephen Spencer

On Oct 11, 2020, at 1:05 AM, kc6mie <kc6mie@...> wrote:

I’ll look.

Stephen Spencer

On Oct 10, 2020, at 11:02 PM, Mel Marcus <melm@...> wrote:



I bet you have the mode determined by rig button turned on

Mel
NE9A
a
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 10:10 pm
To: N3FJPSoftwareUsers@groups.io

In AC log, I use the drop down and choose FT8, in a few seconds it reverts back to SSB

Stephen Spencer

On Oct 10, 2020, at 7:33 PM, Mel Marcus <melm@...> wrote:


why are you saying you cannot change it?

Mel
NE9A
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 9:23 pm
To: N3FJPSoftwareUsers@groups.io

Maybe it’s been showing SSB all along but I thought it showed FT8?

Stephen Spencer

> On Oct 10, 2020, at 7:12 PM, kc6mie <kc6mie@...> wrote:
>
> I must have made a change accidentally. AC log shows SSB but I’m working FT8 and when it logs it shows FT8. What did I select to have this happen. I can’t change it in AC log.
>
>
>
> Stephen Spencer
>
>
>
>
>
> <IMG_3096.JPG>







Mel Marcus
 

AC   settings > rig interface  > mode determined by

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sun, October 11, 2020 3:07 am
To: N3FJPSoftwareUsers@groups.io

Is that setting in AC, WSJTX or JTalert?

Stephen Spencer

On Oct 11, 2020, at 1:05 AM, kc6mie <kc6mie@...> wrote:

I’ll look.

Stephen Spencer

On Oct 10, 2020, at 11:02 PM, Mel Marcus <melm@...> wrote:



I bet you have the mode determined by rig button turned on

Mel
NE9A
a
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 10:10 pm
To: N3FJPSoftwareUsers@groups.io

In AC log, I use the drop down and choose FT8, in a few seconds it reverts back to SSB

Stephen Spencer

On Oct 10, 2020, at 7:33 PM, Mel Marcus <melm@...> wrote:


why are you saying you cannot change it?

Mel
NE9A
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 9:23 pm
To: N3FJPSoftwareUsers@groups.io

Maybe it’s been showing SSB all along but I thought it showed FT8?

Stephen Spencer

> On Oct 10, 2020, at 7:12 PM, kc6mie <kc6mie@...> wrote:
>
> I must have made a change accidentally. AC log shows SSB but I’m working FT8 and when it logs it shows FT8. What did I select to have this happen. I can’t change it in AC log.
>
>
>
> Stephen Spencer
>
>
>
>
>
> <IMG_3096.JPG>







kc6mie
 

Yes I had rig checked
Thanks

Stephen Spencer

On Oct 11, 2020, at 5:25 AM, Mel Marcus <melm@...> wrote:


AC   settings > rig interface  > mode determined by

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sun, October 11, 2020 3:07 am
To: N3FJPSoftwareUsers@groups.io

Is that setting in AC, WSJTX or JTalert?

Stephen Spencer

On Oct 11, 2020, at 1:05 AM, kc6mie <kc6mie@...> wrote:

I’ll look.

Stephen Spencer

On Oct 10, 2020, at 11:02 PM, Mel Marcus <melm@...> wrote:



I bet you have the mode determined by rig button turned on

Mel
NE9A
a
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 10:10 pm
To: N3FJPSoftwareUsers@groups.io

In AC log, I use the drop down and choose FT8, in a few seconds it reverts back to SSB

Stephen Spencer

On Oct 10, 2020, at 7:33 PM, Mel Marcus <melm@...> wrote:


why are you saying you cannot change it?

Mel
NE9A
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Question
From: "kc6mie" <kc6mie@...>
Date: Sat, October 10, 2020 9:23 pm
To: N3FJPSoftwareUsers@groups.io

Maybe it’s been showing SSB all along but I thought it showed FT8?

Stephen Spencer

> On Oct 10, 2020, at 7:12 PM, kc6mie <kc6mie@...> wrote:
>
> I must have made a change accidentally. AC log shows SSB but I’m working FT8 and when it logs it shows FT8. What did I select to have this happen. I can’t change it in AC log.
>
>
>
> Stephen Spencer
>
>
>
>
>
> <IMG_3096.JPG>